The World's Largest Public Domain Media Search Engine

train

geartrain

power train

wheels

sprockets

sprocket

engines

speeds

speed

stabilizers

Topic: 

gears

393 media by topic ∙ page 1 of 4
Outbuilding with Three Gears, from Chippendale Drawings, Vol. II

Outbuilding with Three Gears, from Chippendale Drawings, Vol. II

Thomas Chippendale (British, baptised Otley, West Yorkshire 1718–1779 London)

Outbuilding with Three Gears, from Chippendale Drawings, Vol. II

Outbuilding with Three Gears, from Chippendale Drawings, Vol. II

Tillbehör från AB Scania Bilreparationer.Foto från Tekniska museets maskinhall 1952.

Tillbehör från AB Scania Bilreparationer.Foto från Tekniska museets ma...

Tillbehör från AB Scania Bilreparationer.Foto från Tekniska museets maskinhall 1952.

Bulgaria från Hamburg, skeppsbrott 1899.

Bulgaria från Hamburg, skeppsbrott 1899.

Bulgaria från Hamburg, skeppsbrott 1899.

Interiør med konvertorovn fra smeltehytta på Røros ca. 1900, Sør Trøndelag, Norge

Interiør med konvertorovn fra smeltehytta på Røros ca. 1900, Sør Trønd...

Arbeidere ved den konverteren. Denne smelteovnen revolusjonerte smelteprosessen. Ved å tilføre smeltemassen store mengder oksygen, kunne denne ovnen produsere kopper fra skjærstein på 1 ½ time, mens det tok 1 ½... More

Pipes and gears.

Pipes and gears.

Interiør med konvertorovn fra smeltehytta på Røros ca. 1894, Sør Trøndelag, Norge

Interiør med konvertorovn fra smeltehytta på Røros ca. 1894, Sør Trønd...

Arbeidere og ingeniører oppstilt ved den første konverteren som Røros Kobberverk anskaffet i 1887. Andreas Holmsen er nr. 2 fra høyre.

Olika järnföremål tillverkad vid Söderfors Bruk.

Olika järnföremål tillverkad vid Söderfors Bruk.

Olika järnföremål tillverkad vid Söderfors Bruk.

Kugghulsmaskin konstruerad av Christopher Polhem.

Kugghulsmaskin konstruerad av Christopher Polhem.

Kugghulsmaskin konstruerad av Christopher Polhem.

Hantverkets propagandautställning: Kugghjulstillverkning. Anordnare Stockholms stads verkstadsskolor.

Hantverkets propagandautställning: Kugghjulstillverkning. Anordnare St...

Hantverkets propagandautställning: Kugghjulstillverkning. Anordnare Stockholms stads verkstadsskolor.

Christopher Polhems modell till skeppsuppdragningsverk.

Christopher Polhems modell till skeppsuppdragningsverk.

Christopher Polhems modell till skeppsuppdragningsverk.

Fabrik Cylindriskt kugghjul.

Fabrik Cylindriskt kugghjul.

Cylindriskt kugghjul.

Where it happened. (See photos 3070 to 3074), Sanders Cotton Mfg. Co., Bessemer City, N.C. In this and the adjoining mill (run by the same company) there were still many dangerous, unprotected gears, belts, belts running through the open floor, rough broken flooring on which the workers would likely stumble, etc.- when I went through these mills (October 23rd, 1912) over two months after the accident. Location: Bessemer City, North Carolina.

Where it happened. (See photos 3070 to 3074), Sanders Cotton Mfg. Co.,...

Where it happened. (See photos 3070 to 3074) Sanders Cotton Mfg. Co., Bessemer City, N.C. In this and the adjoining mill (run by the same company) there were still many dangerous unprotected gears, belts, belts running through the open floor, rough broken flooring on which the workers would likely stumble, etc. - when I went through these mills (October 23rd, 1912) over two months after the accident. Location: Bessemer City, North Carolina.

Where it happened. (See photos 3070 to 3074) Sanders Cotton Mfg. Co., ...

Where it happened. (See photos 3070 to 3074) Sanders Cotton Mfg. Co., Bessemer City, N.C. In this and the adjoining mill (run by the same company) there were still many dangerous unprotected gears, belts, belts running through the open floor, rough broken flooring on which the workers would likely stumble, etc. - when I went through these mills (October 23rd, 1912) over two months after the accident. Location: Bessemer City, North Carolina.

Where it happened. (See photos 3070 to 3074) Sanders Cotton Mfg. Co., ...

Colleges and Universities - University of Michigan - Adjusting the gears in a rear. If they are not too noisy they try it again until it meets the approval of the instructor. Chassis Department, Auto Mechanics. University of Michigan, Ann Arbor

Colleges and Universities - University of Michigan - Adjusting the gea...

Colleges and Universities - University of Michigan

Photograph of Wilson Dam Construction

Photograph of Wilson Dam Construction

Original caption: Terry Crane Truck & Gearing. Wilson Dam Construction Progress Photographs

Kugghjul av gjutjärn vid Lyckeåborgs bruk i Augerum, Blekinge.

Kugghjul av gjutjärn vid Lyckeåborgs bruk i Augerum, Blekinge.

Kugghjul av gjutjärn vid Lyckeåborgs bruk i Augerum, Blekinge.

Interiör från trösklogen i Åsmundshyttan. Det stora kugghjulet drevs av vattenhjulet som satt omedelbart utanför vägen

Interiör från trösklogen i Åsmundshyttan. Det stora kugghjulet drevs a...

Interiör från trösklogen i Åsmundshyttan. Det stora kugghjulet drevs av vattenhjulet som satt omedelbart utanför vägen

Washington youngster solves parking problem. Washington, D.C., March 30. Transportation and no parking worries. Nelm Clark, 16-year old Washington youngster, solved this problem by combining a lawn mower motor with a set of motor cycle gears to make this unusual midget auto. Costing $60 to build the contraption weighs only 150 pounds--the weight is its main feature--and if you run out of gas you easily push it or tuck it under your arm and walk home, 3/30/1937

Washington youngster solves parking problem. Washington, D.C., March 3...

Putting fly in ointment of "McNutt-for -president" boom. Washington, D.C., April 21. If he continues the pace he is setting to date, Rep. Albert J. Engel, Republican of Michigan, appears certain to throw the "monkey wrench" into the gears of the "McNutt-for-President" boom which got underway during the past winter. Rep. Engel is pictured studying plans he dug up for the two palaces, "Summer" and "Regular" which as high commissioner of the Philippines, McNutt wants built as Commissioner's residences in islands. The proposed palaces are to cost $500,000 and $250,000 respectively. Rep. Engel takes great pride in pointing out that plans for the palaces include 18 lavatories and bathrooms with a seating capacity of 43, 4/21/38

Putting fly in ointment of "McNutt-for -president" boom. Washington, D...

Gears and all machinery in a cotton seed oil mill are covered with a fine dust. Cotton seed oil mill. McLennan County, Texas

Gears and all machinery in a cotton seed oil mill are covered with a f...

Chrysler tank arsenal. Headed for the oven, this rack of herringbone gears has been completed and is now awaiting the hear treatment which will harden the gears for use in the M-3 tank. Dozens of different types of gear arrangements are used in these twenty-eight ton monsters

Chrysler tank arsenal. Headed for the oven, this rack of herringbone g...

Chrysler tank arsenal. Headed for the oven, this rack of herringbone gears has been completed and is now awaiting the hear treatment which will harden the gears for use in the M-3 tank. Dozens of different types of gear arrangements are used in these twenty-eight ton monsters

Chrysler tank arsenal. Headed for the oven, this rack of herringbone g...

Actual size of negative is C (approximately 4 x 5 inches). Caption card lists some of the printing history of image. Title and other information from caption card. Transfer; United States. Office of War Informa... More

The old Kenyon's johnnycake flour mill in Usquepaugh is run by water power. The waterwheel is underneath the mill and by means of these two gears its power is brought into the mill

The old Kenyon's johnnycake flour mill in Usquepaugh is run by water p...

Tank manufacture (Chrysler). The worker in the foreground is inspecting herringbone gears for Chrysler twenty-eight ton medium tanks, just after they have been finished, or "shaved." All parts of these tanks undergo constant inspection after each of the various operations which eventually result in the complete assembled tank

Tank manufacture (Chrysler). The worker in the foreground is inspectin...

Tank manufacture (Chrysler). Twelve of these bell type carburizing furnaces are in twenty-four hour operation at the huge Chrysler tank arsenal in Detroit. They are employed to barburize final drive gears, transmission parts and other parts of the twenty-eight ton M-3 tanks in production there

Tank manufacture (Chrysler). Twelve of these bell type carburizing fur...

Good men, good machines, good materials mean good gears for the rear axles of halftrac scout cars now being produced for our Army in an Ohio truck plant. White Motor Company, Cleveland, Ohio

Good men, good machines, good materials mean good gears for the rear a...

A New York City watch manufacturer, making clocks for airplanes, is seeking automatic screw machine facilities for the manufacture of twenty-thousand to thirty-thousand small clock gears. Material: high carbon steel, oil hardened. Dimentsions: O.D. .3685 inches; diameter at base of teeth. .3355 inches; Thirty-six teeth, depth, .0165 inches; thickness, .046 inches; diameter center hole, .1 inches

A New York City watch manufacturer, making clocks for airplanes, is se...

Subcontracting (Wilbarger and Sons). Electrically driven transmission gears have speeded up production at the small Wilbarger and Sons Shop, in Harrisonburg, Virginia. Workers at the shop installed the gears and transmission of an old Ford coupe on this machine and the results have been more than gratifying

Subcontracting (Wilbarger and Sons). Electrically driven transmission ...

Actual size of negative is D (approximately 3 1/4 x 4 1/4 inches). Caption card lists some of the printing history of image. Title and other information from caption card. Transfer; United States. Office of War... More

Subcontracting (Wilbarger and Sons). Electrically driven transmission gears have speeded up production at the small Wilbarger and Sons Shop, in Harrisonburg, Virginia. Workers at the shop installed the gears and transmission of an old Ford coupe on this machine and the results have been more than gratifying

Subcontracting (Wilbarger and Sons). Electrically driven transmission ...

Bofors forty-millimeter mounts. Gears for guns-for-victory. Hundreds of these precision cut gears roll off specially designed gear-cutters daily in the Bofors plant of a large rubber factory. When assembled, they'll be part of the Bofors forty- millimeter anti-aircraft gun mounts and carriages, some of the war essentials now manufactured in a plant whose sole product used to be tires for the family sedan

Bofors forty-millimeter mounts. Gears for guns-for-victory. Hundreds o...

Production. Diesel engines. Blower gears that will be assembled into diesel engines for the Navy are carefully matched in a Midwest manufacturing plant

Production. Diesel engines. Blower gears that will be assembled into d...

Reduction gears. Pratt and Whitney Aircraft Corporation. East Hartford, Connecticut

Reduction gears. Pratt and Whitney Aircraft Corporation. East Hartford...

Bofors forty-millimeter mounts. The machine of bronze rings gears for the production of Bofors forty-millimeter anti-aircraft guns mounts and carriages at a large Midwest rubber factory involves skilled precision operations. Here an expert workman is making the final cut on a vertical turret lathe. When this operation is complete, the bronze ring will be moved to the gear for the concluding operation

Bofors forty-millimeter mounts. The machine of bronze rings gears for ...

Photograph of Wooden Gears of the Grist Mill

Photograph of Wooden Gears of the Grist Mill

Original caption: Wooden gears of the Grist Mill. Historic Photographs

Pittsburgh, Pennsylvania (vicinity). Champion no. 1 coal cleaning plant. Oiling the gears of the huge drums that dry the coal after washing

Pittsburgh, Pennsylvania (vicinity). Champion no. 1 coal cleaning plan...

Manpower. Southern shipyard workers. A keen eye and a steady hand guide Olie R. Cawethon in hobbing gears for ships of the United Nations. Cawethon, a former diesel engineer, answered the Navy's call for skilled workers, and is today operating a milling machine in a Southern Navy yard

Manpower. Southern shipyard workers. A keen eye and a steady hand guid...

Manpower. Southern shipyard workers. A keen eye and a steady hand guide Olie R. Cawethon in hobbing gears for ships of the United Nations. Cawethon, a former diesel engineer, answered the Navy's call for skilled workers, and is today operating a milling machine in a Southern Navy yard

Manpower. Southern shipyard workers. A keen eye and a steady hand guid...

De Land pool. Bits and parts. Old pumps, gears, chains, parts from every kind of machine under the sun comprise Casey's source of supply in the corner of his De Land, Florida shop. When he needs a new machine, most of the parts come from this junk heap. On a recent contract handled by the De Land pool, he couldn't get steel for a certain die. He found the metal in the gear he is holding, made the die himself, and put it to use for making airplane parts

De Land pool. Bits and parts. Old pumps, gears, chains, parts from eve...

Production. BT-13A ("Valiant") basic trainers. Landing gears for "Valiant" basic trainers at Vultee's Downey, California plant. At the Downey plant is made the BT-13A ("Valiant") basic trainer--a fast, sturdy ship powered by a Pratt and Whitney Wasp engine

Production. BT-13A ("Valiant") basic trainers. Landing gears for "Vali...

Nashville, Tennessee. Installing landing gears in wing section. Vultee Aircraft Corporation plant

Nashville, Tennessee. Installing landing gears in wing section. Vultee...

Landing gears completely assembled are delivered to the final assembly floor, where they will be attached to B-25 bombers

Landing gears completely assembled are delivered to the final assembly...

De Land pool. Carr's Machine Shop. L.F. Quinton used to be a radio sound engineer with a home workshop where he acquired skill in working to close tolerances, making model racing cars. Now he's using that "know-how" making precision worm gears for the De Land, Florida pool

De Land pool. Carr's Machine Shop. L.F. Quinton used to be a radio sou...

Gears to grind the Axis. Gears to grind the Axis off the earth. Transmitting power from high speed turbines to propeller shafts, these massive wheels will soon be turning over miles of ocean as America's fighting forces cross the seas to bring the offensive to the Axis's door

Gears to grind the Axis. Gears to grind the Axis off the earth. Transm...

Conversion. Pianos to airplane motors. Using the same drill press which once assembled piano parts, this employee of a Chicago firm now installs gears in the pneumatic motors of trainer planes. The factory has stopped piano production for the duration and now produces trainer-plane motors for America's armed forces. Gulbransen Company

Conversion. Pianos to airplane motors. Using the same drill press whic...

Conversion. Hosiery factory. These gears were once used in the manufacture of women's stockings. Today they've been put to far more important use with their conversion to the production of mosquito netting for America's armed forces. Here, two plant engineers inspect the worm gear changeover on a loom undergoing conversion. These gears are frequently known as mesh gears, since they control the size and type of the netting mesh. Van Raalte Company

Conversion. Hosiery factory. These gears were once used in the manufac...

De Land pool. Bits and parts. Old pumps, gears, chains, parts from every kind of machine under the sun comprise Casey's source of supply in the corner of his De Land, Florida shop. When he needs a new machine, most of the parts come from this junk heap. On a recent contract handled by the De Land pool, he couldn't get steel for a certain die. He found the metal in the gear he is holding, made the die himself, and put it to use for making airplane parts

De Land pool. Bits and parts. Old pumps, gears, chains, parts from eve...

Actual size of negative is C (approximately 4 x 5 inches). Title and other information from caption card. Transfer; United States. Office of War Information. Overseas Picture Division. Washington Division; 1944... More

Nashville, Tennessee. Working on landing gears for a bomber. Vultee Aircraft Corporation plant

Nashville, Tennessee. Working on landing gears for a bomber. Vultee Ai...

Pittsburgh, Pennsylvania (vicinity). Champion no. 1 coal cleaning plant. Oiling the gears of the huge drums that dry the coal after washing

Pittsburgh, Pennsylvania (vicinity). Champion no. 1 coal cleaning plan...

Two new tools were set in the New Britain-Gridley lathe, pictured above, to adapt it for the cutting of twenty-millimeter shell booster parts. The new parts are an eccentric spindle, which may be seen attached to a driving rod in the center of the machine, and a thread rolling attachment. In peacetime, the machine was used to turn out spur gears, worm wheels and commentator rings in steel and brass

Two new tools were set in the New Britain-Gridley lathe, pictured abov...

Nashville, Tennessee. Working on landing gears for a bomber. Vultee Aircraft Corporation plant

Nashville, Tennessee. Working on landing gears for a bomber. Vultee Ai...

Production. Pratt and Whitney airplane engines. Magneto driving gears for Pratt and Whitney airplane motors are tested for hardness on a Rockwell machine in a large Eastern plant producing engines in great numbers for our armed forces. Pratt and Whitney Aircraft

Production. Pratt and Whitney airplane engines. Magneto driving gears ...

Production. Milling machines and machine castings. From one end of a machine tool plant to another one finds parts of all kinds arranged for assembly into finished products. These are bevel gears

Production. Milling machines and machine castings. From one end of a m...

A New Britain-Gridley lathe is worked by an experienced operator at a Midwestern company. The machine which formerly made spur gears, worm wheels and commentator rings has been converted to war use by being tooled with an eccentric spindle and thread rolling attachment for the production of twenty-millimeter shell boosters

A New Britain-Gridley lathe is worked by an experienced operator at a ...

Conversion. Hosiery factory. These gears were once used in the manufacture of women's stockings. Today they've been put to far more important use with their conversion to the production of mosquito netting for America's armed forces. Here, two plant engineers inspect the worm gear changeover on a loom undergoing conversion. These gears are frequently known as mesh gears, since they control the size and type of the netting mesh. Van Raalte Company

Conversion. Hosiery factory. These gears were once used in the manufac...

Actual size of negative is C (approximately 4 x 5 inches). Annotation on negative. Title and other information from caption card. Transfer; United States. Office of War Information. Overseas Picture Division. W... More

Gears to grind the Axis. Gears to grind the Axis off the earth. Transmitting power from high speed turbines to propeller shafts, these massive wheels will soon be turning over miles of ocean as America's fighting forces cross the seas to bring the offensive to the Axis's door

Gears to grind the Axis. Gears to grind the Axis off the earth. Transm...

Actual size of negative is B (approximately 5 x 7 inches). Title and other information from caption card. Transfer; United States. Office of War Information. Overseas Picture Division. Washington Division; 1944... More

Geared to defense. A 16-inch gun carriage elevating rack has its gears cut by a workman in an eastern arsenal

Geared to defense. A 16-inch gun carriage elevating rack has its gears...

Production. Aircraft engines. Hundreds of gears pass through the expert hands of Dorothy Miller and Sylvia Dreiser during their eight-hour working day in a large Midwest aircraft plant. Inspection of these vital cogs in America's war machine is a delicate task and one which requires infinite patience and precision. Melrose Park, Buick plant

Production. Aircraft engines. Hundreds of gears pass through the exper...

Conversion. Hosiery factory. These husky workers used to manufacture triple-sheer hosiery for Miss America. Today they're working for their Uncle Sam servicing mesh gears on a loom now producing mosquito netting for the Army and Navy. Van Raalte Company

Conversion. Hosiery factory. These husky workers used to manufacture t...

Production. Marine engines. Gears for marine engines for the Navy are produced in great quantity at a Midwest plant. The finest of material and workmanship go into their manufacture. Continental Motors, Michigan

Production. Marine engines. Gears for marine engines for the Navy are ...

De Land pool. La Roe shop. Fifty-three-year-old Earl La Roe and his wife, of Eustis, Louisiana, solved one of the De Land industrial pool's most difficult problems by subcontracting part of a war order in their garage workshop. Mr. La Roe helps his wife in the operation of cutting worm gears on their machine

De Land pool. La Roe shop. Fifty-three-year-old Earl La Roe and his wi...

Production. Milling machines and machine castings. These are spur gears piled up at a large Midwest machine tool plant producing highly essential equipment for making various war materials

Production. Milling machines and machine castings. These are spur gear...

Gears to grind the Axis. Giant gears to guide America's fleets around the sees to victory. A workman, dwarfed by the towering wheels, directs the moving of a high speed gear blank to a hooking machine. The surge of the mightiest surf won't faze these titans, whose job it is to speed the day when the Axis will be blasted to the bottom of the ocean

Gears to grind the Axis. Giant gears to guide America's fleets around ...

Actual size of negative is B (approximately 5 x 7 inches). Title and other information from caption card. Transfer; United States. Office of War Information. Overseas Picture Division. Washington Division; 1944... More

Production. Milling machines and machine castings. Precision gears are essential for machine tools to ensure accurate, smooth, quiet operations and long life. This gear grinder -- itself a machine tool -- is perfecting the working surfaces between the teeth of a milling machine gear. The milky liquid is coolant used to control the temperature at the grinding point so that the delicate physical character of the metal, produced by predetermined and careful heat treating, will not be disturbed. Location: a large Midwest machine tool plant

Production. Milling machines and machine castings. Precision gears are...

Gears to grind the Axis. Giant gears to guide America's fleets around the sees to victory. A workman, dwarfed by the towering wheels, directs the moving of a high speed gear blank to a hooking machine. The surge of the mightiest surf won't faze these titans, whose job it is to speed the day when the Axis will be blasted to the bottom of the ocean

Gears to grind the Axis. Giant gears to guide America's fleets around ...

Conversion. Hosiery factory. More essential to America's war effort than this attractive nightgown are millions of yards of mosquito netting now being made by an Eastern mill. Conversion of the plant from manufacture of hosiery and gloves to mosquito netting for the Army and Navy involved changing the pattern cam and driving gears on a Tricot-warp-a knit machine. Van Raalte Company

Conversion. Hosiery factory. More essential to America's war effort th...

Production. B-25 "Billy Mitchell" bombers. Landing gears for B-25 bombers, completely assembled, are delivered to the final assembly line of North American's Inglewood, California, plant. In addition to the battle-tested B-25 "Billy Mitchell" bomber, in General Doolittle's raid on Tokyo, this plant produces the P-51 "Mustang" fighter plane which was first brought into prominence by the British raid on Dieppe

Production. B-25 "Billy Mitchell" bombers. Landing gears for B-25 bomb...

De Land pool. La Roe shop. Mrs. Earl La Roe of Eustis, Florida, a grandmother with two sons in the army, doing her daily shift in the family's garage workshop. She is cutting worm gears needed for the army aircraft equipment made by the De Land, Florida industrial pool

De Land pool. La Roe shop. Mrs. Earl La Roe of Eustis, Florida, a gran...

Conversion. Hosiery factory. This mechanic used to tend machines which produced some of America's sheerest hosiery. Today he's working for America's armed forces on these same machines, which are producing mosquito netting for the Army and Navy. In the picture, he's servicing the mesh gears of a loom. Van Raalte Company

Conversion. Hosiery factory. This mechanic used to tend machines which...

Production. Milling machines and machine castings. Many holes have to be bored in the innards of a machine tool's main casting to accomodate gears, shafts, tubings and mountings which eventually comprise its interior. This workman uses every one of the drills and reamers shown here on each milling machine bed casting that he receives

Production. Milling machines and machine castings. Many holes have to ...

Conversion. Hosiery factory. More essential to Uncle Sam than these gloves are millions of yards of mosquito netting now being made by an Eastern mill. Conversion of the plant from manufacture of hosiery and gloves to mosquito netting for the Army and Navy involved changing the pattern cam and driving gears on a Tricot-warp-a knit machine. Van Raalte Company

Conversion. Hosiery factory. More essential to Uncle Sam than these gl...

Manpower. Southern shipyard workers. A keen eye and a steady hand guide Olie R. Cawethon in hobbing gears for ships of the United Nations. Cawethon, a former diesel engineer, answered the Navy's call for skilled workers, and is today operating a milling machine in a Southern Navy yard

Manpower. Southern shipyard workers. A keen eye and a steady hand guid...

Conversion. Farm implements to cargo winches. Hobbing five bull gears simultaneously for a plow tractor prior to the conversion of a Midwestern farm implement manufacturer. The machine has since been adapted to cutting gears for cargo winches for the Maritime Commission

Conversion. Farm implements to cargo winches. Hobbing five bull gears ...

Morgårdshammars Mekaniska Verkstad. Spårupptagning i ett kugghjul till gruvspel, 1943.

Morgårdshammars Mekaniska Verkstad. Spårupptagning i ett kugghjul till...

Morgårdshammars Mekaniska Verkstad. Spårupptagning i ett kugghjul till gruvspel, 1943.

Morgårdshammars Mekaniska Verkstad. Fräsning av kugghjul enligt avvalsningsmetoden. Det större kugghjulet på bilden är avsett för ett gruvspel.

Morgårdshammars Mekaniska Verkstad. Fräsning av kugghjul enligt avvals...

Morgårdshammars Mekaniska Verkstad. Fräsning av kugghjul enligt avvalsningsmetoden. Det större kugghjulet på bilden är avsett för ett gruvspel.

The murder of a perfectly good differential - reel 1 - starring Joe Dope While draining the oil one day, the gaze of Joe Dope chanced to stray to a pippin so cute that the love-sic galoot left the oil - and the gears - by the way! Don't be a dope! Handle equipment right / / Cpt. Will Eisner, Ordnance.

The murder of a perfectly good differential - reel 1 - starring Joe Do...

Poster shows Joe Dope destroying a military truck by driving it without oil. Title from item.

Gears on tie-in survey device for alpha magnetic field measurement, referred to as "Cedric." Formerly confidential. Photograph taken June 7, 1943. Magnet-73

Gears on tie-in survey device for alpha magnetic field measurement, re...

Digital Preservation File Name and Format: 434-LB-5-XBD201208-00733.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Various ship-building related objects I1766

Various ship-building related objects I1766

I1766

Various ship-building related objects IV1192

Various ship-building related objects IV1192

IV1192

Various ship-building related objects IV1190

Various ship-building related objects IV1190

IV1190

Various ship-building related objects IV1191

Various ship-building related objects IV1191

IV1191

Dynamic Gear, Amityville, New York. Gears I

Dynamic Gear, Amityville, New York. Gears I

Sweden, Karlskrona. Various industrial facilities %s

Sweden, Karlskrona. Various industrial facilities %s

Sweden: manufacturing industrial facilities.

Sweden, Karlskrona. Various industrial facilities %s

Sweden, Karlskrona. Various industrial facilities %s

Sweden: manufacturing industrial facilities.

TEST GEARS FOR TN SHOWING TOOTH PITTING

TEST GEARS FOR TN SHOWING TOOTH PITTING

The original finding aid described this as: Capture Date: 12/22/1976 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

TEST GEARS FOR TN SHOWING TOOTH PITTING

TEST GEARS FOR TN SHOWING TOOTH PITTING

The original finding aid described this as: Capture Date: 12/22/1976 Photographer: DONALD HUEBLER Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

GEARS, NASA Technology Images

GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 11/2/1978 Photographer: CLIFF BROOKS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

VARIOUS GEARS, NASA Technology Images

VARIOUS GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 2/26/1979 Photographer: GREG LEWIS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

VARIOUS GEARS, NASA Technology Images

VARIOUS GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 2/13/1979 Photographer: GREG LEWIS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

VARIOUS GEARS, NASA Technology Images

VARIOUS GEARS, NASA Technology Images

The original finding aid described this as: Capture Date: 2/26/1979 Photographer: GREG LEWIS Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

Previous

of 4

Next