The World's Largest Public Domain Media Search Engine
Topic

first part

907 media by topicpage 1 of 10
St. Matthew, from The Luther Bible
The Michelfeldt Tapestry (Allegory on Social Injustice), first part of three
Fish from "[Antonio and Mellida.] The History of Antonio and Mellida. The first part. As it hath beene sundry times acted, by the children of Paules. Written by I. M. [i.e. J. Marston.]"

Fish from "[Antonio and Mellida.] The History of Antonio and Mellida. ...

This image has been taken from scan 000015 from "[Antonio and Mellida.] The History of Antonio and Mellida. The first part. As it hath beene sundry times acted, by the children of Paules. Written by I. M. [i.e.... More

The first part of Henry IV
Shakspeare. First part of King Henry the Fourth, act II, scene II : The road by Gadshill : Prince Henry, Poins, Peto, Falstaff, etc.
The American spelling book: ontaining an easy standard of pronunciation. Being the first part of a Grammatical institute of the English language
Shakspeare. First part of King Henry 6th, act II, scene V
Falstaff Rising Slowly (Shakespeare, First Part of King Henry IV, Act 5, Scene 4)

Falstaff Rising Slowly (Shakespeare, First Part of King Henry IV, Act ...

James Neagle (British, London 1765– 1822 Philadelphia, Pennsylvania)

Shakspeare. First part of King Henry the Fourth, act III, scene I : The Archdeacon of Bangor's house in Wales : Hotspur, Worcester, Mortimer, & Owen Glendower
Shakspeare. First part of King Henry 6th, act II, scene IV
Shakspeare. First part of King Henry the Fourth, act II, scene IV : The Boars Head tavern : Prince Henry, Falstaff, Poins, etc.
Shakspeare. First part of King Henry IV : Plain near Shrewsbury. Prince Henry, Hotspur, and Falstaff
Shakspeare. First part of King Henry Sixth : Countess of Auvergne's castle : Countess, Porter, Talbot, etc.
Nieuwe paskaart van t'eerste gadeelte der Middelansche-zee tusschen t'i: Cadix en t'i Malta [Material cartográfico] = nouvelle carte marine pour la premier partie de la mer-Mediterraneé entre i de Cadix et i de Malta = the new sea map of the first part of the Midland-sea betwext i Cadix et i de Malta = nueva carta maritima la primera parte del mar-Mediterraneo entre la i de Cadix y la i de Malta = nuova carta maritima la prima parte del mar-Mediteraneo tra l'i di Cadix et quella di Malta
King of Scots from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

King of Scots from "The History of the Kingdom of Scotland ... to the ...

This image has been taken from scan 000160 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Wars of Scottish Independence from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Wars of Scottish Independence from "The History of the Kingdom of Scot...

This image has been taken from scan 000128 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

4th earl of Morton from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

4th earl of Morton from "The History of the Kingdom of Scotland ... to...

This image has been taken from scan 000175 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Mary Queen of Scots from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Mary Queen of Scots from "The History of the Kingdom of Scotland ... t...

This image has been taken from scan 000165 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

profile from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

profile from "The History of the Kingdom of Scotland ... to the happy ...

This image has been taken from scan 000127 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

King Alfred from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

King Alfred from "The History of the Kingdom of Scotland ... to the ha...

This image has been taken from scan 000075 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

William II from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

William II from "The History of the Kingdom of Scotland ... to the hap...

This image has been taken from scan 000106 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

James IV from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

James IV from "The History of the Kingdom of Scotland ... to the happy...

This image has been taken from scan 000157 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

last king of the House of Wessex from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

last king of the House of Wessex from "The History of the Kingdom of S...

This image has been taken from scan 000103 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Edward II from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Edward II from "The History of the Kingdom of Scotland ... to the happ...

This image has been taken from scan 000131 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

first Norman King of England from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

first Norman King of England from "The History of the Kingdom of Scotl...

This image has been taken from scan 000105 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Henry Stuart, 1st Duke of Albany from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Henry Stuart, 1st Duke of Albany from "The History of the Kingdom of S...

This image has been taken from scan 000168 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

profile from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

profile from "The History of the Kingdom of Scotland ... to the happy ...

This image has been taken from scan 000019 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Richard I from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Richard I from "The History of the Kingdom of Scotland ... to the happ...

This image has been taken from scan 000117 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

James I from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

James I from "The History of the Kingdom of Scotland ... to the happy ...

This image has been taken from scan 000146 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Alfred the Great from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Alfred the Great from "The History of the Kingdom of Scotland ... to t...

This image has been taken from scan 000074 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Henry V from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Henry V from "The History of the Kingdom of Scotland ... to the happy ...

This image has been taken from scan 000144 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

James III from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

James III from "The History of the Kingdom of Scotland ... to the happ...

This image has been taken from scan 000154 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Richard III from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Richard III from "The History of the Kingdom of Scotland ... to the ha...

This image has been taken from scan 000139 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

coronation chair from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

coronation chair from "The History of the Kingdom of Scotland ... to t...

This image has been taken from scan 000010 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

James I from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

James I from "The History of the Kingdom of Scotland ... to the happy ...

This image has been taken from scan 000172 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Henry Stuart Lord Darnley from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

Henry Stuart Lord Darnley from "The History of the Kingdom of Scotland...

This image has been taken from scan 000169 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

James I, King of Scots from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

James I, King of Scots from "The History of the Kingdom of Scotland .....

This image has been taken from scan 000147 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

King of Scots from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portraits [of the first part of “The History of the Kingdoms of Scotland and Ireland.”] [Edited by James Caulfield.] L.P"

King of Scots from "The History of the Kingdom of Scotland ... to the ...

This image has been taken from scan 000151 from "The History of the Kingdom of Scotland ... to the happy Union of both kingdoms ... in 1602 ... By Richard Burton (N. Crouch). A new edition, with woodcut portrai... More

Boar's Head Tavern: Prince Hal, Falstaff and Poins (Shakespeare, First Part of Henry IV, Act 2, Scene 4)
Celestin Nanteuil - First Part, the Departure
Jar, American art collection
First Part of a Modern and Useful Work Containing 120 Designs of Furniture
map from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74)"

map from "Practical General Continental Guide. France, Belgium, Hollan...

This image has been taken from scan 000327 from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74... More

map from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74)"

map from "Practical General Continental Guide. France, Belgium, Hollan...

This image has been taken from scan 000010 from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74... More

map from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74)"

map from "Practical General Continental Guide. France, Belgium, Hollan...

This image has been taken from scan 000126 from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74... More

map from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74)"

map from "Practical General Continental Guide. France, Belgium, Hollan...

This image has been taken from scan 000086 from "Practical General Continental Guide. France, Belgium, Holland, ... Red Book for the Continent. First part. ... By an Englishman Abroad [A. T. Gregory]. 1866 (-74... More

Untitled (sketch of lake and hills; first part of 'Loch Katrine')
map from "Ancient India as described by Megasthenes and Arrian. Being a translation of the fragments of the Indika of Megasthenes collected by Dr. Schwanbeck and of the first part of the Indika of Arrian, by J. W. McCrindle ... With ... notes ... Reprinted, with additions, from the “Indian Antiquary,” etc"

map from "Ancient India as described by Megasthenes and Arrian. Being ...

This image has been taken from scan 000006 from "Ancient India as described by Megasthenes and Arrian. Being a translation of the fragments of the Indika of Megasthenes collected by Dr. Schwanbeck and of the fi... More

Elihu Vedder - A Glimpse into Hell, or Fear
Monarch Minstrel, first part, no. 1
Monarch Minstrel, first part, no. 3
Monarch Minstrel, first part, no. 4
Monarch Minstrel, first part, no. 4
Monarch Minstrel, first part, no. 6
Monarch Minstrel, first part, no. 2
Monarch Minstrel, first part, no. 3
Monarch Minstrel, first part, no. 2
Monarch Minstrel, first part, no. 2
Monarch Minstrel, first part, no. 4
Monarch Minstrel, first part, no. 3
Monarch Minstrel, first part, no. 1
American Red Cross - Refugees - The first part of the drill of Les Petits Soldats at the refugee colony at St. Lunaire, France. This colony is under the direction of the A.R.C

American Red Cross - Refugees - The first part of the drill of Les Pet...

Photographer: American Red Cross, France American Red Cross - Refugees

Untitled

Untitled

This untitled illustration by cartoonist Clifford Berryman, which appeared in the Washington Evening Star on June 6, 1917, shows Mr. DC proudly displaying his list containing the names of 31,003 brave young men... More

Folger Library exteriors. Carving on Folger Library building, first part of Henry IV
Folger Library exteriors. Carving on Folger Library building, first part of Henry IV
Folger Library exteriors. Carving on Folger Library building, first part of Henry IV
Folger Library exteriors. Carving on Folger Library building, first part of Henry IV
Home of Claude Kanady, president of the Ola self-help sawmill co-op. First part of this house was built a year ago. Now he is adding to it lumber from the sawmill. Gem County, Idaho. See general caption 48

Home of Claude Kanady, president of the Ola self-help sawmill co-op. F...

Actual size of negative is C (approximately 4 x 5 inches). Title and other information from caption card. Transfer; United States. Office of War Information. Overseas Picture Division. Washington Division; 1944... More

Home of Claude Kanady, president of the Ola self-help sawmill co-op. First part of this house was built a year ago. Now he is adding to it lumber from the sawmill. Gem County, Idaho. See general caption 48
Farm Security Administration exhibit. (Co-op Veterinary Service Aids FSA Borrowers). First part

Farm Security Administration exhibit. (Co-op Veterinary Service Aids F...

Original negative missing. Title and other information from caption card. Negative has no corresponding print in a lot. Transfer; United States. Office of War Information. Overseas Picture Division. Washington ... More

New Marine recruits stand in line to receive their post exchange issue during the first part of processing in. The recruits will form Series 2089

New Marine recruits stand in line to receive their post exchange issue...

The original finding aid described this photograph as: Base: Usmc Recruit Depot,Parris Island State: South Carolina (SC) Country: United States Of America (USA) Scene Camera Operator: SGT Flowers Release S... More

The U.S. flag and state flags line the edge of the first part of the ship during keel laying of the nuclear-powered aircraft carrier THEODORE ROOSEVELT (CVN-71)

The U.S. flag and state flags line the edge of the first part of the s...

The original finding aid described this photograph as: Base: Newport News State: Virginia (VA) Country: United States Of America (USA) Scene Camera Operator: PH2 E.G. Nocciolo Release Status: Released to P... More

The U.S. flag stands out among state flags and among crane wires which just lowered the first part of the ship during keel laying of the nuclear-powered aircraft carrier THEODORE ROOSEVELT (CVN-71)

The U.S. flag stands out among state flags and among crane wires which...

The original finding aid described this photograph as: Base: Newport News State: Virginia (VA) Country: United States Of America (USA) Scene Camera Operator: PH2 E.G. Nocciolo Release Status: Released to P... More

The U.S. flag and state flags line the edge of the first part of the ship during keel laying of the nuclear-powered aircraft carrier THEODORE ROOSEVELT (CVN-71)

The U.S. flag and state flags line the edge of the first part of the s...

The original finding aid described this photograph as: Base: Newport News State: Virginia (VA) Country: United States Of America (USA) Scene Camera Operator: PH2 E.G. Nocciolo Release Status: Released to P... More

Colima Volcano, State of Jalisco, Mexico

Colima Volcano, State of Jalisco, Mexico

STS039-75-101 (28 April-6 May 1991) --- Spending over eight days in Earth orbit, the STS-39 crew was able to return with photographic coverage of highly variegated geographic scenery, including a number of volc... More

Hungarians and Americans work to raise a heavy metal ramp on to a raft. The first part of the mission is complete and the soldiers of the 130th Engineer Brigade have beached the raft on the bank of the Sava River during Operation JOINT ENDEAVOR

Hungarians and Americans work to raise a heavy metal ramp on to a raft...

The original finding aid described this photograph as: Subject Operation/Series: JOINT ENDEAVOR Country: Bosnia And/I Herzegovina (BIH) Scene Camera Operator: PFC Benjamin A. Lebron, USA Release Status: Rel... More

In the Payload Hazardous Servicing Facility (PHSF), a crane lifts equipment for mission STS-103 out of its shipping container to move it to a workstand. The equipment is the first part of payload flight hardware for the third Hubble Space Telescope Servicing Mission (SM-3A). The hardware will undergo final testing and integration of payload elements in the PHSF. Mission STS-103 is a "call-up" mission which is being planned due to the need to replace portions of the Hubble's pointing system, the gyros, which have begun to fail. Although Hubble is operating normally and conducting its scientific observations, only three of its six gyroscopes are working properly. The gyroscopes allow the telescope to point at stars, galaxies and planets. The STS-103 crew will not only replace gyroscopes, it will also replace a Fine Guidance Sensor and an older computer with a new enhanced model, an older data tape recorder with a solid state digital recorder, a failed spare transmitter with a new one, and degraded insulation on the telescope with new thermal insulation. The crew will also install a Battery Voltage/Temperature Improvement Kit to protect the spacecraft batteries from overcharging and overheating when the telescope goes into a safe mode. Launch of STS-103 is currently targeted for Oct. 14 but the date is under review KSC-99pp1043

In the Payload Hazardous Servicing Facility (PHSF), a crane lifts equi...

In the Payload Hazardous Servicing Facility (PHSF), a crane lifts equipment for mission STS-103 out of its shipping container to move it to a workstand. The equipment is the first part of payload flight hardwar... More

In the Payload Hazardous Servicing Facility (PHSF), workers check the placement of equipment, part of mission STS-103, onto a workstand. The equipment is the first part of payload flight hardware for the third Hubble Space Telescope Servicing Mission (SM-3A). The hardware will undergo final testing and integration of payload elements in the PHSF. Mission STS-103 is a "call-up" mission which is being planned due to the need to replace portions of the Hubble's pointing system, the gyros, which have begun to fail. Although Hubble is operating normally and conducting its scientific observations, only three of its six gyroscopes are working properly. The gyroscopes allow the telescope to point at stars, galaxies and planets. The STS-103 crew will not only replace gyroscopes, it will also replace a Fine Guidance Sensor and an older computer with a new enhanced model, an older data tape recorder with a solid state digital recorder, a failed spare transmitter with a new one, and degraded insulation on the telescope with new thermal insulation. The crew will also install a Battery Voltage/Temperature Improvement Kit to protect the spacecraft batteries from overcharging and overheating when the telescope goes into a safe mode. Launch of STS-103 is currently targeted for Oct. 14 but the date is under review KSC-99pp1044

In the Payload Hazardous Servicing Facility (PHSF), workers check the ...

In the Payload Hazardous Servicing Facility (PHSF), workers check the placement of equipment, part of mission STS-103, onto a workstand. The equipment is the first part of payload flight hardware for the third ... More

In the Payload Hazardous Servicing Facility (PHSF), a crane lifts equipment for mission STS-103 out of its shipping container. The equipment is the first part of payload flight hardware for the third Hubble Space Telescope Servicing Mission (SM-3A). The hardware will undergo final testing and integration of payload elements in the PHSF. Mission STS-103 is a "call-up" mission which is being planned due to the need to replace portions of the Hubble's pointing system, the gyros, which have begun to fail. Although Hubble is operating normally and conducting its scientific observations, only three of its six gyroscopes are working properly. The gyroscopes allow the telescope to point at stars, galaxies and planets. The STS-103 crew will not only replace gyroscopes, it will also replace a Fine Guidance Sensor and an older computer with a new enhanced model, an older data tape recorder with a solid state digital recorder, a failed spare transmitter with a new one, and degraded insulation on the telescope with new thermal insulation. The crew will also install a Battery Voltage/Temperature Improvement Kit to protect the spacecraft batteries from overcharging and overheating when the telescope goes into a safe mode. Launch of STS-103 is currently targeted for Oct. 14 but the date is under review KSC-99pp1042

In the Payload Hazardous Servicing Facility (PHSF), a crane lifts equi...

In the Payload Hazardous Servicing Facility (PHSF), a crane lifts equipment for mission STS-103 out of its shipping container. The equipment is the first part of payload flight hardware for the third Hubble Spa... More

KENNEDY SPACE CENTER, FLA. --   Orbiter Atlantis rolls out of the Orbiter Processing Facility on its way to the Vehicle Assembly Building for space vehicle mate.  As part of final preparations before transfer to the launch pad, Atlantis will be lifted vertically into its VAB high bay and mated to the twin solid rocket boosters and external tank.  The STS-110 mission resumes International Space Station assembly operations with the delivery of the S0 truss, which will support solar panels providing additional power to the Station.  The payload will also include the first part of a Mobile Transporter that will provide a moveable base for the Station’s Canadian robotic arm.  STS-110 is scheduled for launch April 4 KSC-02pd0246

KENNEDY SPACE CENTER, FLA. -- Orbiter Atlantis rolls out of the Orbi...

KENNEDY SPACE CENTER, FLA. -- Orbiter Atlantis rolls out of the Orbiter Processing Facility on its way to the Vehicle Assembly Building for space vehicle mate. As part of final preparations before transfer t... More

KENNEDY SPACE CENTER, Fla. -  After leaving the Orbiter Processing Facility, Orbiter Atlantis nears the Vehicle Assembly Building for space vehicle mate.  As part of final preparations before transfer to the launch pad, Atlantis will be lifted vertically into its VAB high bay and mated to the twin solid rocket boosters and external tank.  The STS-110 mission resumes International Space Station assembly operations with the delivery of the S0 truss, which will support solar panels providing additional power to the Station.  The payload will also include the first part of a Mobile Transporter that will provide a moveable base for the Station’s Canadian robotic arm.  STS-110 is scheduled for launch April 4 KSC-02pd0247

KENNEDY SPACE CENTER, Fla. - After leaving the Orbiter Processing Fac...

KENNEDY SPACE CENTER, Fla. - After leaving the Orbiter Processing Facility, Orbiter Atlantis nears the Vehicle Assembly Building for space vehicle mate. As part of final preparations before transfer to the la... More

KENNEDY SPACE CENTER, Fla. - With employees watching, Orbiter Atlantis rolls into the Vehicle Assembly Building for space vehicle mate.  As part of final preparations before transfer to the launch pad, Atlantis will be lifted vertically into its VAB high bay and mated to the twin solid rocket boosters and external tank.  The STS-110 mission resumes International Space Station assembly operations with the delivery of the S0 truss, which will support solar panels providing additional power to the Station.  The payload will also include the first part of a Mobile Transporter that will provide a moveable base for the Station’s Canadian robotic arm.  STS-110 is scheduled for launch April 4 KSC-02pd0248

KENNEDY SPACE CENTER, Fla. - With employees watching, Orbiter Atlantis...

KENNEDY SPACE CENTER, Fla. - With employees watching, Orbiter Atlantis rolls into the Vehicle Assembly Building for space vehicle mate. As part of final preparations before transfer to the launch pad, Atlantis... More

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 17-A, Cape Canaveral Air Force Station, the first part of the fairing is moved into place around the Comet Nucleus Tour (CONTOUR) spacecraft.  The fairing is the outer cover that protects the spacecraft during launch. Below the spacecraft is the Delta II rocket, the launch vehicle.  CONTOUR will provide the first detailed look into the heart of a comet -- the nucleus. Flying as close as 60 miles (100 kilometers) to at least two comets, the spacecraft will take the sharpest pictures yet of a nucleus while analyzing the gas and dust that surround them.  Launch of CONTOUR is scheduled for July 1, 2002 KSC-02pd1077

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 17-A, Cape Canaveral A...

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 17-A, Cape Canaveral Air Force Station, the first part of the fairing is moved into place around the Comet Nucleus Tour (CONTOUR) spacecraft. The fairing is the ... More

KENNEDY SPACE CENTER, FLA. --  At Launch Complex 17-A, Cape Canaveral Air Force Station, the first part of the fairing has been installed around the Comet Nucleus Tour (CONTOUR) spacecraft.  The fairing is the outer cover that protects the spacecraft during launch. Below the spacecraft is the Delta II rocket, the launch vehicle.  CONTOUR will provide the first detailed look into the heart of a comet -- the nucleus. Flying as close as 60 miles (100 kilometers) to at least two comets, the spacecraft will take the sharpest pictures yet of a nucleus while analyzing the gas and dust that surround them.  Launch of CONTOUR is scheduled for July 1, 2002 KSC-02pd1078

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 17-A, Cape Canaveral ...

KENNEDY SPACE CENTER, FLA. -- At Launch Complex 17-A, Cape Canaveral Air Force Station, the first part of the fairing has been installed around the Comet Nucleus Tour (CONTOUR) spacecraft. The fairing is the ... More

KENNEDY SPACE CENTER, FLA. --  Workers make adjustments on the first part of the fairing around the TDRS-J satellite before encapsulation continues. The satellite is scheduled to be launched aboard a Lockheed Martin Atlas IIA-Centaur rocket from Launch Complex 36-A, Cape Canaveral Air Force Station, Fla., on Dec. 4.  The third in a series of telemetry satellites, TDRS-J will help replenish the current constellation of geosynchronous TDRS satellites. The TDRS System is the primary source of space-to-ground voice, data and telemetry for the Space Shuttle. It also provides communications with the International Space Station and scientific spacecraft in low-Earth orbit such as the Hubble Space Telescope. This new advanced series of satellites will extend the availability of TDRS communications services until about 2017. KSC-02pd1776

KENNEDY SPACE CENTER, FLA. -- Workers make adjustments on the first p...

KENNEDY SPACE CENTER, FLA. -- Workers make adjustments on the first part of the fairing around the TDRS-J satellite before encapsulation continues. The satellite is scheduled to be launched aboard a Lockheed M... More

KENNEDY SPACE CENTER, FLA. -- In the launch tower on Launch Complex 17-B, Cape Canaveral Air Force Station, the first part of the fairing is seen in place around the Space Infrared Telescope Facility (SIRTF).   SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground. Consisting of an 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF is one of NASA's largest infrared telescopes to be launched.  SIRTF is currently scheduled for launch aboard a Delta II rocket from Launch Complex 17-B, Cape Canaveral Air Force Station. KSC-03pd1031

KENNEDY SPACE CENTER, FLA. -- In the launch tower on Launch Complex 17...

KENNEDY SPACE CENTER, FLA. -- In the launch tower on Launch Complex 17-B, Cape Canaveral Air Force Station, the first part of the fairing is seen in place around the Space Infrared Telescope Facility (SIRTF). ... More

KENNEDY SPACE CENTER, FLA. -- The first part of the fairing encloses the Galaxy Evolution Explorer (GALEX).  The spacecraft is already mated to the Pegasus launch vehicle.  After encapsulation, the GALEX/Pegasus will be transported to Cape Canaveral Air Force Station and mated to the L-1011 about four days before launch. A new launch date has not been determined. KSC-03pd1049

KENNEDY SPACE CENTER, FLA. -- The first part of the fairing encloses t...

KENNEDY SPACE CENTER, FLA. -- The first part of the fairing encloses the Galaxy Evolution Explorer (GALEX). The spacecraft is already mated to the Pegasus launch vehicle. After encapsulation, the GALEX/Pegasu... More

KENNEDY SPACE CENTER, FLA. --  A worker in the Multi-Payload Processing Facility gestures toward the Galaxy Evolution Explorer (GALEX) being prepared for encapsulation.  The first part of the fairing is behind him.  The spacecraft is already mated to the Pegasus launch vehicle.  After encapsulation, the GALEX/Pegasus will be transported to Cape Canaveral Air Force Station and mated to the L-1011 about four days before launch. A new launch date has not been determined. KSC-03pd1047

KENNEDY SPACE CENTER, FLA. -- A worker in the Multi-Payload Processin...

KENNEDY SPACE CENTER, FLA. -- A worker in the Multi-Payload Processing Facility gestures toward the Galaxy Evolution Explorer (GALEX) being prepared for encapsulation. The first part of the fairing is behind ... More

KENNEDY SPACE CENTER, FLA. --  Workers watch as the first part of the fairing closes in on the Galaxy Evolution Explorer (GALEX) for encapsulation.  The spacecraft is already mated to the Pegasus launch vehicle.  After encapsulation, the GALEX/Pegasus will be transported to Cape Canaveral Air Force Station and mated to the L-1011 about four days before launch. A new launch date has not been determined.  . KSC-03pd1048

KENNEDY SPACE CENTER, FLA. -- Workers watch as the first part of the ...

KENNEDY SPACE CENTER, FLA. -- Workers watch as the first part of the fairing closes in on the Galaxy Evolution Explorer (GALEX) for encapsulation. The spacecraft is already mated to the Pegasus launch vehicle... More

KENNEDY SPACE CENTER, FLA. -- Workers in the Multi-Payload Processing Facility prepare the Galaxy Evolution Explorer (GALEX) for encapsulation.  The first part of the fairing is in the background.  The spacecraft is already mated to the Pegasus launch vehicle.  After encapsulation, the GALEX/Pegasus will be transported to Cape Canaveral Air Force Station and mated to the L-1011 about four days before launch. A new launch date has not been determined. KSC-03pd1046

KENNEDY SPACE CENTER, FLA. -- Workers in the Multi-Payload Processing ...

KENNEDY SPACE CENTER, FLA. -- Workers in the Multi-Payload Processing Facility prepare the Galaxy Evolution Explorer (GALEX) for encapsulation. The first part of the fairing is in the background. The spacecra... More

KENNEDY SPACE CENTER, FLA. - Boeing workers at Astrotech Space Operations in Titusville, Fla., secure the first part of a transportation canister around the Delta II upper stage booster on the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) spacecraft.  Another panel waits in front of the work stand.  MESSENGER will be transferred to Launch Pad 17-B at Cape Canaveral Air Force Station, Fla.  Liftoff of MESSENGER aboard a Boeing Delta II Heavy rocket is scheduled for Aug. 2.  The spacecraft is expected to reach orbit around the planet in March 2011.  MESSENGER was built for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md. KSC-04pd1487

KENNEDY SPACE CENTER, FLA. - Boeing workers at Astrotech Space Operati...

KENNEDY SPACE CENTER, FLA. - Boeing workers at Astrotech Space Operations in Titusville, Fla., secure the first part of a transportation canister around the Delta II upper stage booster on the MESSENGER (Mercur... More

KENNEDY SPACE CENTER, FLA. - Boeing workers at Astrotech Space Operations in Titusville, Fla., secure the first part of a transportation canister around the Delta II upper stage booster on the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) spacecraft.  MESSENGER will be transferred to Launch Pad 17-B at Cape Canaveral Air Force Station, Fla.  Liftoff of MESSENGER aboard a Boeing Delta II Heavy rocket is scheduled for Aug. 2.  The spacecraft is expected to reach orbit around the planet in March 2011.  MESSENGER was built for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md. KSC-04pd1488

KENNEDY SPACE CENTER, FLA. - Boeing workers at Astrotech Space Operati...

KENNEDY SPACE CENTER, FLA. - Boeing workers at Astrotech Space Operations in Titusville, Fla., secure the first part of a transportation canister around the Delta II upper stage booster on the MESSENGER (Mercur... More

KENNEDY SPACE CENTER, FLA. - After bagging the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) spacecraft, Boeing workers at Astrotech Space Operations in Titusville, Fla., place the first part of a transportation canister around the Delta II upper stage booster.  MESSENGER will be transferred to Launch Pad 17-B at Cape Canaveral Air Force Station, Fla.  Liftoff of MESSENGER aboard a Boeing Delta II Heavy rocket is scheduled for Aug. 2.  The spacecraft is expected to reach orbit around the planet in March 2011.  MESSENGER was built for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md. KSC-04pd1486

KENNEDY SPACE CENTER, FLA. - After bagging the MESSENGER (Mercury Surf...

KENNEDY SPACE CENTER, FLA. - After bagging the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) spacecraft, Boeing workers at Astrotech Space Operations in Titusville, Fla., place the fi... More

Pyramid Point Trail

Pyramid Point Trail

First part of the Pyramid Point Hiking Trail from the trailhead.

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workforce host a job fair at a hotel in Cape Canaveral, Fla., to help center employees with future planning and placement as the Space Shuttle Program comes to an end. Recruiters included federal, state and local government agencies and organizations, as well as private companies from across the country. The first part of the job fair took place Sept. 15 in Kennedy's Operations Support Building II and Space Station Processing Facility. Kennedy's Human Resources Office also has hosted workshops, seminars and other events to prepare employees as much as possible for future opportunities. Photo credit: NASA/Jack Pfaller KSC-2010-4657

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workfo...

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workforce host a job fair at a hotel in Cape Canaveral, Fla., to help center employees with future planning and placement as the Space Shuttle Pro... More

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workforce host a job fair at a hotel in Cape Canaveral, Fla., to help center employees with future planning and placement as the Space Shuttle Program comes to an end. Recruiters included federal, state and local government agencies and organizations, as well as private companies from across the country. The first part of the job fair took place Sept. 15 in Kennedy's Operations Support Building II and Space Station Processing Facility. Kennedy's Human Resources Office also has hosted workshops, seminars and other events to prepare employees as much as possible for future opportunities. Photo credit: NASA/Jack Pfaller KSC-2010-4659

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workfo...

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workforce host a job fair at a hotel in Cape Canaveral, Fla., to help center employees with future planning and placement as the Space Shuttle Pro... More

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workforce host a job fair at a hotel in Cape Canaveral, Fla., to help center employees with future planning and placement as the Space Shuttle Program comes to an end. Recruiters included federal, state and local government agencies and organizations, as well as private companies from across the country. The first part of the job fair took place Sept. 15 in Kennedy's Operations Support Building II and Space Station Processing Facility. Kennedy's Human Resources Office also has hosted workshops, seminars and other events to prepare employees as much as possible for future opportunities. Photo credit: NASA/Jack Pfaller KSC-2010-4658

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workfo...

CAPE CANAVERAL, Fla. -- NASA's Kennedy Space Center and Brevard Workforce host a job fair at a hotel in Cape Canaveral, Fla., to help center employees with future planning and placement as the Space Shuttle Pro... More

Lt. Cmdr. Victor Glover, assigned to the Dambusters of Strike Fighter Squadron (VFA) 195, is greeted by his daughters at the Naval Air Facility Atsugi airfield during the first part of the squadron's homecoming celebration.

Lt. Cmdr. Victor Glover, assigned to the Dambusters of Strike Fighter ...

ATSUGI, Japan (Oct. 26, 2010) Lt. Cmdr. Victor Glover, assigned to the Dambusters of Strike Fighter Squadron (VFA) 195, is greeted by his daughters at the Naval Air Facility Atsugi airfield during the first par... More

VANDENBERG AIR FORCE BASE, Calif. -- The payload fairing for the Glory mission stands in the East High Bay at the Astrotech payload processing facility at Vandenberg Air Force Base in California. The payload fairing will cover the Glory spacecraft  and be placed at the top of a Taurus XL rocket slated to lift the spacecraft into orbit. The payload fairing will protect the Glory spacecraft from aerodynamic pressures and heating during the first part of its climb into orbit. Once Glory reaches orbit, it will collect data on the properties of aerosols and black carbon. It also will help scientists understand how the sun's irradiance affects Earth's climate. Launch is scheduled for 5:09 a.m. EST Feb. 23. For information, visit www.nasa.gov/glory. Photo credit: NASA/Ed Henry, VAFB KSC-2011-1168

VANDENBERG AIR FORCE BASE, Calif. -- The payload fairing for the Glory...

VANDENBERG AIR FORCE BASE, Calif. -- The payload fairing for the Glory mission stands in the East High Bay at the Astrotech payload processing facility at Vandenberg Air Force Base in California. The payload fa... More

VANDENBERG AIR FORCE BASE, Calif. -- A technician works in the Astrotech payload processing facility at Vandenberg Air Force Base in California before the pieces that will make up the payload fairing for the Glory mission are moved to the East High Bay. The payload fairing will protect the Glory spacecraft from aerodynamic pressures and heating during the first part of its climb into orbit. Once Glory reaches orbit, it will collect data on the properties of aerosols and black carbon. It also will help scientists understand how the sun's irradiance affects Earth's climate. Launch is scheduled for 5:09 a.m. EST Feb. 23. For information, visit www.nasa.gov/glory. Photo credit: NASA/Ed Henry, VAFB KSC-2011-1162

VANDENBERG AIR FORCE BASE, Calif. -- A technician works in the Astrote...

VANDENBERG AIR FORCE BASE, Calif. -- A technician works in the Astrotech payload processing facility at Vandenberg Air Force Base in California before the pieces that will make up the payload fairing for the Gl... More

Previous

of 10

Next