The World's Largest Public Domain Media Search Engine

cargo delivery

public
129 media by topicpage 1 of 2
CAPE CANAVERAL, Fla. -  In the Canister Rotation Facility at NASA's Kennedy Space Center, workers get ready to lift the payload canister to a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2773

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Ke...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, workers get ready to lift the payload canister to a vertical position for the trip to Launch Pad 39A. The canister’s car... More

KENNEDY SPACE CENTER, FLA. --  With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B.  Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.  Once inside the PCR, they will be transferred into Space Shuttle Discovery's payload bay after the vehicle has rolled out to the pad.  On the right is the fixed service structure.  The PCR is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. Seals around the mating surface of the PCR fit against the orbiter and allow the opening of the payload bay or canister doors and removal of the cargo without exposure to outside air and contaminants. A clean-air purge in the PCR maintains environmental control during PCR cargo operations. Cargo is removed from the payload canister and installed vertically in the orbiter by the payload ground handling mechanism (PGHM). Photo credit: NASA/Kim Shiflett KSC-06pd2462

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, th...

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B. Inside the c... More

KENNEDY SPACE CENTER, FLA. --   The payload canister is lifted off its transporter up to the payload changeout room.  Inside the canister are the S5 truss, SPACEHAB module and external stowage platform 3, the payload for mission STS-118.  The red umbilical lines are still attached.  The payloads will be transferred inside the changeout room to wait for Space Shuttle Endeavour to arrive at the pad.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay.  The mission will be Endeavour's first flight in more than four years. The shuttle has undergone extensive modifications, including the addition of safety upgrades already added to shuttles Discovery and Atlantis. Endeavour also features new hardware, such as the Station-to-Shuttle Power Transfer System that will allow the docked shuttle to draw electrical power from the station and extend its visits to the orbiting lab.  Space Shuttle Endeavour is targeted for launch on Aug. 7 from Launch Pad 39A.   Photo credit: NASA/Kim Shiflett KSC-07pd1811

KENNEDY SPACE CENTER, FLA. -- The payload canister is lifted off its...

KENNEDY SPACE CENTER, FLA. -- The payload canister is lifted off its transporter up to the payload changeout room. Inside the canister are the S5 truss, SPACEHAB module and external stowage platform 3, the p... More

KENNEDY SPACE CENTER, FLA. --  At sunset, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, slowly moves toward Launch Pad 39A at NASA's Kennedy Space Center.  At the pad the payload will be transferred to the payload changeout room, part of the rotating service structure. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0333

KENNEDY SPACE CENTER, FLA. -- At sunset, the payload canister contain...

KENNEDY SPACE CENTER, FLA. -- At sunset, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, ... More

CAPE CANAVERAL, Fla. -  In the Canister Rotation Facility at NASA's Kennedy Space Center, workers get ready to lift the payload canister to a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2774

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Ke...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, workers get ready to lift the payload canister to a vertical position for the trip to Launch Pad 39A. The canister’s car... More

CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is lifted toward the payload changeout room above.  The canister contains four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2797

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is lifted toward the payload changeout room above. The canister contains four carriers holding various equipment f... More

KENNEDY SPACE CENTER, FLA. --  With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B.  Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.  Once inside the PCR, they will be transferred into Space Shuttle Discovery's payload bay once the vehicle has rolled out to the pad. On the right is the fixed service structure.  The PCR is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. Seals around the mating surface of the PCR fit against the orbiter and allow the opening of the payload bay or canister doors and removal of the cargo without exposure to outside air and contaminants. A clean-air purge in the PCR maintains environmental control during PCR cargo operations. Cargo is removed from the payload canister and installed vertically in the orbiter by the payload ground handling mechanism (PGHM). Photo credit: NASA/Kim Shiflett KSC-06pd2463

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, th...

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B. Inside the c... More

KENNEDY SPACE CENTER, FLA. --  The payload canister on its transporter sits beneath the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A.  The canister contains the S3/S4 integrated truss for mission STS-117 to the International Space Station aboard Space Shuttle Atlantis. Once inside the PCR, the S3/S4 arrays will be transferred into Space Shuttle Atlantis' payload bay after the vehicle has rolled out to the pad.  The changeout room is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15.  Photo credit: NASA/Kim Shiflett KSC-07pd0349

KENNEDY SPACE CENTER, FLA. -- The payload canister on its transporter...

KENNEDY SPACE CENTER, FLA. -- The payload canister on its transporter sits beneath the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A. The canister contains the S3/S4 integra... More

KENNEDY SPACE CENTER, FLA. --  The payload canister on its transporter arrives on Launch Pad 39A, stopping beneath the payload changeout room on the rotating service structure (RSS).  The canister contains the S3/S4 integrated truss for mission STS-117 to the International Space Station aboard Space Shuttle Atlantis. Once inside the PCR, the S3/S4 arrays will be transferred into Space Shuttle Atlantis' payload bay after the vehicle has rolled out to the pad.  The changeout room is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay.The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15.  Photo credit: NASA/Kim Shiflett KSC-07pd0348

KENNEDY SPACE CENTER, FLA. -- The payload canister on its transporter...

KENNEDY SPACE CENTER, FLA. -- The payload canister on its transporter arrives on Launch Pad 39A, stopping beneath the payload changeout room on the rotating service structure (RSS). The canister contains the ... More

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, workers on either side of the payload canister check its condition after being rotated from a horizontal position. The canister contains the Japanese Experiment Module -Pressurized Module, which will be transported to Launch Pad 39A for space shuttle Discovery’s STS-124 mission.   At the pad, the payload will be transferred from the canister into the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. On the mission, the STS-124 crew will transport the JEM as well as the Japanese Remote Manipulator System to the International Space Station.  The launch of Discovery is targeted for May 31.    Photo credit: NASA/Jim Grossmann KSC-08pd1016

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's...

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, workers on either side of the payload canister check its condition after being rotated from a horizontal position. Th... More

CAPE CANAVERAL, Fla. -   In the Canister Rotation Facility at NASA's Kennedy Space Center, workers check cable fittings that will lift the payload canister to a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2772

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's K...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, workers check cable fittings that will lift the payload canister to a vertical position for the trip to Launch Pad 39A.... More

CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center, workers on the crane prepare to attach adjusted guide shoes onto the outside of the payload canister for a second lift to the payload changeout room.  The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2788

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, workers on the crane prepare to attach adjusted guide shoes onto the outside of the payload canister for a second lift to the payload ch... More

CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is lifted toward the payload changeout room above.  The canister contains four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2796

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is lifted toward the payload changeout room above. The canister contains four carriers holding various equipment f... More

KENNEDY SPACE CENTER, FLA. -- The SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (above) are ready to be moved from the payload canister into the Payload Changeout Room (PCR) at Launch Pad 39A. Part of the Rotating Service Structure, the PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC-00pp0371

KENNEDY SPACE CENTER, FLA. -- The SPACEHAB Double Module (bottom) and ...

KENNEDY SPACE CENTER, FLA. -- The SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (above) are ready to be moved from the payload canister into the Payload Changeout Room (PCR) at Launch Pad 39A. Pa... More

KENNEDY SPACE CENTER, FLA. -- Workers in the Payload Changeout Room (PCR) at Launch Pad 39A check out the SPACEHAB Double Module before moving into the PCR. Part of the Rotating Service Structure, the PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC-00pp0373

KENNEDY SPACE CENTER, FLA. -- Workers in the Payload Changeout Room (P...

KENNEDY SPACE CENTER, FLA. -- Workers in the Payload Changeout Room (PCR) at Launch Pad 39A check out the SPACEHAB Double Module before moving into the PCR. Part of the Rotating Service Structure, the PCR is an... More

KENNEDY SPACE CENTER, FLA. --   With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B.  Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.  Once inside the PCR, they will be transferred into Space Shuttle Discovery's payload bay once the vehicle has rolled out to the pad.  On the right is the fixed service structure.  The PCR is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. Seals around the mating surface of the PCR fit against the orbiter and allow the opening of the payload bay or canister doors and removal of the cargo without exposure to outside air and contaminants. A clean-air purge in the PCR maintains environmental control during PCR cargo operations. Cargo is removed from the payload canister and installed vertically in the orbiter by the payload ground handling mechanism (PGHM). Photo credit: NASA/Kim Shiflett KSC-06pd2461

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, t...

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B. Inside the ... More

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, movement begins to raise the payload canister containing the Japanese Experiment Module -Pressurized Module to a vertical position.  The canister will be transported to Launch Pad 39A for space shuttle Discovery’s STS-124 mission.  At the pad, the payload will be transferred from the canister into the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. On the mission, the STS-124 crew will transport the JEM as well as the Japanese Remote Manipulator System to the International Space Station.  The launch of Discovery is targeted for May 31.    Photo credit: NASA/Jim Grossmann KSC-08pd1011

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's...

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, movement begins to raise the payload canister containing the Japanese Experiment Module -Pressurized Module to a vert... More

CAPE CANAVERAL, Fla. -   Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, the doors of the payload canister are open.  Inside are four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10. Photo credit: NASA/Jack Pfaller KSC-08pd2801

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, at...

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, the doors of the payload canister are open. Inside are four carriers holding various equipment... More

CAPE CANAVERAL, Fla. -    Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, workers prepare for the transfer of the payload from the canister into the PCR.  The payload comprises four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10. Photo credit: NASA/Jack Pfaller KSC-08pd2802

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, a...

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, workers prepare for the transfer of the payload from the canister into the PCR. The payload c... More

KENNEDY SPACE CENTER, FLA. -- The SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (above) are ready to be moved from the payload canister into the Payload Changeout Room (PCR) at Launch Pad 39A. Part of the Rotating Service Structure, the PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC00pp0371

KENNEDY SPACE CENTER, FLA. -- The SPACEHAB Double Module (bottom) and ...

KENNEDY SPACE CENTER, FLA. -- The SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (above) are ready to be moved from the payload canister into the Payload Changeout Room (PCR) at Launch Pad 39A. Pa... More

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, the opening doors of the canister reveal the S3/S4 integrated truss inside. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The truss is the payload for Space Shuttle Atlantis on mission STS-117 to the International Space Station.  The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15. Photo credit: NASA/Jack Pfaller KSC-07pd0360

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on L...

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, the opening doors of the canister reveal the S3/S4 integrated truss inside. The PCR is the enclosed, environmentally controll... More

KENNEDY SPACE CENTER, FLA. --   The payload transporter arrives with its canister on Launch Pad 39A.  Inside the canister are the S5 truss, SPACEHAB module and external stowage platform 3, the payload for mission STS-118.  The canister will be lifted up to the payload changeout room above and the payloads transferred inside to wait for Space Shuttle Endeavour to arrive at the pad.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The mission will be Endeavour's first flight in more than four years. The shuttle has undergone extensive modifications, including the addition of safety upgrades already added to shuttles Discovery and Atlantis. Endeavour also features new hardware, such as the Station-to-Shuttle Power Transfer System that will allow the docked shuttle to draw electrical power from the station and extend its visits to the orbiting lab.  Space Shuttle Endeavour is targeted for launch on Aug. 7 from Launch Pad 39A.   Photo credit: NASA/Kim Shiflett KSC-07pd1809

KENNEDY SPACE CENTER, FLA. -- The payload transporter arrives with i...

KENNEDY SPACE CENTER, FLA. -- The payload transporter arrives with its canister on Launch Pad 39A. Inside the canister are the S5 truss, SPACEHAB module and external stowage platform 3, the payload for missi... More

KENNEDY SPACE CENTER, FLA. --  On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, is lifted up toward the payload changeout room in the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0341

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Spa...

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Sp... More

CAPE CANAVERAL, Fla. –    The sun sets behind Launch Pad 39A at NASA's Kennedy Space Center where the payload canister with the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System, or RMS, inside awaits cargo transfer to the payload changeout room above.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. From the payload changeout room, the pressurized module and RMS then will be transferred into space shuttle Discovery’s payload bay.  Launch is targeted for May 31.  Photo credit: NASA/Kim Shiflett KSC-08pd1075

CAPE CANAVERAL, Fla. – The sun sets behind Launch Pad 39A at NASA's...

CAPE CANAVERAL, Fla. – The sun sets behind Launch Pad 39A at NASA's Kennedy Space Center where the payload canister with the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulato... More

CAPE CANAVERAL, Fla. -  At Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload canister, at left, is lifted from its transporter toward the payload changeout room in the rotating service structure.  The canister carries a cargo of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  Atlantis is seen at right, atop the mobile launcher platform. The two tail service masts flank the engines in front of the wings.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.  Photo credit: NASA/Troy Cryder KSC-08pd2786

CAPE CANAVERAL, Fla. - At Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - At Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload canister, at left, is lifted from its transporter toward the payload changeout room in the rotating service struc... More

CAPE CANAVERAL, Fla. -   A view of the adjusted guide shoe attached to the outside of the payload canister on Launch Pad 39A at NASA's Kennedy Space Center. A second attempt will be made to lift the canister to the payload changeout room above. The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2791

CAPE CANAVERAL, Fla. - A view of the adjusted guide shoe attached to...

CAPE CANAVERAL, Fla. - A view of the adjusted guide shoe attached to the outside of the payload canister on Launch Pad 39A at NASA's Kennedy Space Center. A second attempt will be made to lift the canister to... More

CAPE CANAVERAL, Fla. -   Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, workers prepare for the transfer of the payload from the canister into the PCR.  The payload comprises four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.   From top to bottom are the Multi-Use Logistic Equipment carrier, the Flight Support System carrier, the Orbital Replacment Unit Carrier and the Super Lightweight Interchangeable Carrier.  The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10. Photo credit: NASA/Jack Pfaller KSC-08pd2803

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, at...

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, workers prepare for the transfer of the payload from the canister into the PCR. The payload co... More

Russian sailors load supplies into the hangar deck of the Russian guided missile destroyer ADMIRAL VINOGRADOV (BPK-554) following a cargo delivery by helicopter during the first Russian/U.S. Navy underway replenishment operation

Russian sailors load supplies into the hangar deck of the Russian guid...

The original finding aid described this photograph as: Country: Northern Arabian Sea Scene Camera Operator: PH1 Mark Therien Release Status: Released to Public Combined Military Service Digital Photographic Files

KENNEDY SPACE CENTER, FLA. --   The inside of Atlantis' payload bay can be seen from inside the payload changeout room. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay.  At the top of the photo is the orbital docking system. At bottom is the integrated cargo carrier - lite, holding three elements: a nitrogen tank assembly that is part of the external active thermal control system on the International Space Station, the European technology Exposure Facility composed of nine science instruments and an autonomous temperature measurement unit, and the SOLAR payload designed for sun observation.  The Columbus Laboratory module will be installed in between. The lab module, built by the European Space Agency, also known as ESA, is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. Columbus is ESA's largest single contribution to the space station. Columbus will fly to the International Space Station on mission STS-122.  The launch is targeted for Dec. 6.  Photo credit: NASA/Kim Shiflett KSC-07pd3288

KENNEDY SPACE CENTER, FLA. -- The inside of Atlantis' payload bay ca...

KENNEDY SPACE CENTER, FLA. -- The inside of Atlantis' payload bay can be seen from inside the payload changeout room. The changeout room is the enclosed, environmentally controlled portion of the rotating ser... More

KENNEDY SPACE CENTER, FLA. --  Under a darkening sky, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, slowly moves past the Vehicle Assembly Building toward Launch Pad 39A at NASA's Kennedy Space Center.  At the pad the payload will be transferred to the payload changeout room, part of the rotating service structure. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0334

KENNEDY SPACE CENTER, FLA. -- Under a darkening sky, the payload cani...

KENNEDY SPACE CENTER, FLA. -- Under a darkening sky, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robo... More

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, the payload canister containing the Japanese Experiment Module -Pressurized Module is ready for rotation to a vertical position.  The canister will be transported to Launch Pad 39A for space shuttle Discovery’s STS-124 mission.  At the pad, the payload will be transferred from the canister into the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. On the mission, the STS-124 crew will transport the JEM as well as the Japanese Remote Manipulator System to the International Space Station.  The launch of Discovery is targeted for May 31.    Photo credit: NASA/Jim Grossmann KSC-08pd1010

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's...

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, the payload canister containing the Japanese Experiment Module -Pressurized Module is ready for rotation to a vertica... More

CAPE CANAVERAL, Fla. –    On Launch Pad 39A at NASA's Kennedy Space Center, workers on the payload canister transporter prepare for the lifting of the payload canister to the waiting payload changeout room above.  Inside the canister are the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System, or RMS, for the STS-124 mission. The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  From the payload changeout room, the pressurized module and RMS then will be transferred into space shuttle Discovery’s payload bay.  Launch is targeted for May 31.  Photo credit: NASA/Kim Shiflett KSC-08pd1076

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Ce...

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center, workers on the payload canister transporter prepare for the lifting of the payload canister to the waiting payload changeout room abov... More

CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister has been lifted up to the payload changeout room for transfer of its cargo.  Inside the canister are the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System, or RMS, for the STS-124 mission. The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  From the payload changeout room, the pressurized module and RMS then will be transferred into space shuttle Discovery’s payload bay.  Launch is targeted for May 31.  Photo credit: NASA/Kim Shiflett KSC-08pd1078

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Cen...

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister has been lifted up to the payload changeout room for transfer of its cargo. Inside the canister are the Japanese ... More

CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister has been lifted up to the payload changeout room for transfer of its cargo.  Inside the canister are the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System, or RMS, for the STS-124 mission. The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. From the payload changeout room, the pressurized module and RMS then will be transferred into space shuttle Discovery’s payload bay.  Launch is targeted for May 31.  Photo credit: NASA/Kim Shiflett KSC-08pd1077

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Cen...

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister has been lifted up to the payload changeout room for transfer of its cargo. Inside the canister are the Japanese ... More

CAPE CANAVERAL, Fla. -  At Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload canister arrives beneath the payload changeout room in the rotating service structure (left).  Space shuttle Atlantis is at right.  The two tail service masts on the mobile launcher platform flank the engines in front of the wings.  The canister carries a cargo of four carriers holding various equipment for the STS-125 mission aboard Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.  Photo credit: NASA/Troy Cryder KSC-08pd2785

CAPE CANAVERAL, Fla. - At Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - At Launch Pad 39A at NASA's Kennedy Space Center in Florida, the payload canister arrives beneath the payload changeout room in the rotating service structure (left). Space shuttle Atla... More

CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is ready to be lifted to the payload changeout room above. The canister contains four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. At right is Atlantis atop the mobile launcher platform.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2795

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is ready to be lifted to the payload changeout room above. The canister contains four carriers holding various equi... More

A U.S. Navy SH-60F Seahawk helicopter assigned to Helicopter

A U.S. Navy SH-60F Seahawk helicopter assigned to Helicopter

A U.S. Navy SH-60F Seahawk helicopter assigned to Helicopter Anti-Submarine Squadron Light 51 carries cargo to the Royal Australian navy frigate HMAS Ballarat in the Java Sea May 9, 2012. (U.S. Navy photo by Ma... More

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and the Integrated Cargo Carrier (ICC) inside is lifted off the payload transporter toward the Payload Changeout Room (PCR) on the Rotating Service Structure (RSS). The PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. At right of the RSS is the Fixed Service Structure. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC00pp0369

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister ...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and the Integrated Cargo Carrier (ICC) inside is lifted off the payload transporter toward the Payload Chang... More

KENNEDY SPACE CENTER, FLA. --  The payload canister transporter and canister move into place under the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B.  Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.  Once inside the PCR, they will be transferred into Space Shuttle Discovery's payload bay once the vehicle has rolled out to the pad. The PCR is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. Seals around the mating surface of the PCR fit against the orbiter and allow the opening of the payload bay or canister doors and removal of the cargo without exposure to outside air and contaminants. A clean-air purge in the PCR maintains environmental control during PCR cargo operations. Cargo is removed from the payload canister and installed vertically in the orbiter by the payload ground handling mechanism (PGHM). Photo credit: NASA/Kim Shiflett KSC-06pd2459

KENNEDY SPACE CENTER, FLA. -- The payload canister transporter and ca...

KENNEDY SPACE CENTER, FLA. -- The payload canister transporter and canister move into place under the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B. Inside the caniste... More

KENNEDY SPACE CENTER, FLA. --   In the payload changeout room (PCR) on Launch Pad 39A, the S3/S4 integrated truss is being moved out of the payload canister.  The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The truss is the payload for Space Shuttle Atlantis on mission STS-117 to the International Space Station.  The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15. Photo credit: NASA/Jack Pfaller KSC-07pd0364

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on...

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, the S3/S4 integrated truss is being moved out of the payload canister. The PCR is the enclosed, environmentally controlled... More

KENNEDY SPACE CENTER, FLA. --    From inside the payload changeout room on Launch Pad 39A, the Columbus Laboratory module is being moved into space shuttle Atlantis' payload bay.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The lab module, built by the European Space Agency, also known as ESA, is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. Columbus is ESA's largest single contribution to the space station. Columbus will fly to the International Space Station on mission STS-122.  The launch is targeted for Dec. 6.  Photo credit: NASA/Kim Shiflett KSC-07pd3292

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout roo...

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout room on Launch Pad 39A, the Columbus Laboratory module is being moved into space shuttle Atlantis' payload bay. The changeout room is the encl... More

KENNEDY SPACE CENTER, FLA. --  The payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, nears the rotating service structure on Launch Pad 39A at NASA's Kennedy Space Center.  The payload will be transferred to the payload changeout room on the service structure. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0340

KENNEDY SPACE CENTER, FLA. -- The payload canister containing the fir...

KENNEDY SPACE CENTER, FLA. -- The payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, nea... More

CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister with the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System, or RMS, inside arrives in position below the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  From the payload changeout room, the pressurized module and RMS then will be transferred into space shuttle Discovery’s payload bay.  Launch is targeted for May 31.  Photo credit: NASA/Kim Shiflett KSC-08pd1074

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Cen...

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister with the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System, or RMS, insid... More

CAPE CANAVERAL, Fla. -   In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is in a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2780

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's K...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is in a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four ca... More

A US Navy (USN) CH-46 Sea Knight helicopter lands for a cargo delivery at Junction City, Ar Ramadi, Iraq. The US Marine Corps (USMC) 1ST Marine Division (MARDIV), and is engaged in Security and Stabilization Operations (SASO) in the Al Anbar Province of Iraq, in support of Operation IRAQI FREEDOM

A US Navy (USN) CH-46 Sea Knight helicopter lands for a cargo delivery...

The original finding aid described this photograph as: Subject Operation/Series: IRAQI FREEDOM Base: Junction City State: Al Anbar Country: Iraq (IRQ) Scene Camera Operator: PFC Brandon E. Loveless, USMC ... More

KENNEDY SPACE CENTER, FLA. --   The payload canister transporter and canister arrive at the gate to Launch Pad 39B.  Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.  They will be moved into the payload changeout room (PCR) at the pad and transferred into Space Shuttle Discovery's payload bay once the vehicle has rolled out to the pad.  The PCR is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. Seals around the mating surface of the PCR fit against the orbiter and allow the opening of the payload bay or canister doors and removal of the cargo without exposure to outside air and contaminants. A clean-air purge in the PCR maintains environmental control during PCR cargo operations. Cargo is removed from the payload canister and installed vertically in the orbiter by the payload ground handling mechanism (PGHM). Photo credit: NASA/Kim Shiflett KSC-06pd2457

KENNEDY SPACE CENTER, FLA. -- The payload canister transporter and c...

KENNEDY SPACE CENTER, FLA. -- The payload canister transporter and canister arrive at the gate to Launch Pad 39B. Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.... More

KENNEDY SPACE CENTER, FLA. --  With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B.  Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.  Once inside the PCR, they will be transferred into Space Shuttle Discovery's payload bay once the vehicle has rolled out to the pad. On the right is the fixed service structure. The PCR is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. Seals around the mating surface of the PCR fit against the orbiter and allow the opening of the payload bay or canister doors and removal of the cargo without exposure to outside air and contaminants. A clean-air purge in the PCR maintains environmental control during PCR cargo operations. Cargo is removed from the payload canister and installed vertically in the orbiter by the payload ground handling mechanism (PGHM). Photo credit: NASA/Kim Shiflett KSC-06pd2464

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, th...

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, the payload canister is lifted up to the payload changeout room (PCR) on the rotating service structure (RSS) on Launch Pad 39B. Inside the c... More

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, the doors of the canister are opened to reveal the S3/S4 integrated truss inside. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The truss is the payload for Space Shuttle Atlantis on mission STS-117 to the International Space Station.  The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15. Photo credit: NASA/Jack Pfaller KSC-07pd0362

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on L...

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, the doors of the canister are opened to reveal the S3/S4 integrated truss inside. The PCR is the enclosed, environmentally co... More

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, the doors of the canister are opened to reveal the S3/S4 integrated truss inside.  The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The truss is the payload for Space Shuttle Atlantis on mission STS-117 to the International Space Station.  The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15. Photo credit: NASA/Jack Pfaller KSC-07pd0361

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on L...

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, the doors of the canister are opened to reveal the S3/S4 integrated truss inside. The PCR is the enclosed, environmentally c... More

CAPE CANAVERAL, Fla. -  In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted toward a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2777

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Ke...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted toward a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists ... More

CAPE CANAVERAL, Fla. -  At NASA's Kennedy Space Center, the payload canister is in the Canister Rotation Facility where it will be lifted to a vertical position.  Workers check the umbilical lines that keep a controlled environment in the canister.  The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2770

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center, the payload ca...

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center, the payload canister is in the Canister Rotation Facility where it will be lifted to a vertical position. Workers check the umbilical lines that keep a c... More

CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister waits for adjusted guide shoes to be attached before being lifted to the payload changeout room for the second time.  The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2787

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister waits for adjusted guide shoes to be attached before being lifted to the payload changeout room for the second time... More

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and the Integrated Cargo Carrier (ICC) inside is lifted off the payload transporter toward the Payload Changeout Room (PCR) on the Rotating Service Structure (RSS). The PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. At right of the RSS is the Fixed Service Structure. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC-00pp0369

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister ...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and the Integrated Cargo Carrier (ICC) inside is lifted off the payload transporter toward the Payload Chang... More

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure toward the Payload Changeout Room, an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC00pp0367

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister ...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure toward the Payload Cha... More

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure (RSS) toward the Payload Changeout Room, an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. At right of the RSS is the Fixed Service Structure, topped by the 80-foot-tall fiberglass lightning mast. The primary payload on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC00pp0368

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister ...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure (RSS) toward the Paylo... More

KENNEDY SPACE CENTER, FLA. --  From inside the payload changeout room on Launch Pad 39A, the Columbus Laboratory module is being moved into space shuttle Atlantis' payload bay.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The lab module, built by the European Space Agency, also known as ESA, is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. Columbus is ESA's largest single contribution to the space station. Columbus will fly to the International Space Station on mission STS-122.  The launch is targeted for Dec. 6.  Photo credit: NASA/Kim Shiflett KSC-07pd3287

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout room ...

KENNEDY SPACE CENTER, FLA. -- From inside the payload changeout room on Launch Pad 39A, the Columbus Laboratory module is being moved into space shuttle Atlantis' payload bay. The changeout room is the enclos... More

CAPE CANAVERAL, Fla. --  In the Vertical Integration Facility at NASA's Kennedy Space Center, technicians monitor the rotation of the payload canister to a vertical position. The canister contains the Japanese Experiment Module -Pressurized Module.  The canister will be transported to Launch Pad 39A for space shuttle Discovery’s STS-124 mission.  At the pad, the payload will be transferred from the canister into the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. On the mission, the STS-124 crew will transport the JEM as well as the Japanese Remote Manipulator System to the International Space Station.  The launch of Discovery is targeted for May 31.    Photo credit: NASA/Jim Grossmann KSC-08pd1009

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA'...

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, technicians monitor the rotation of the payload canister to a vertical position. The canister contains the Japanese ... More

CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center, the payload changeout room on the rotating service structure at center is open and ready to receive the STS-124 mission payload inside the approaching payload canister at far left.  The payload is composed of the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System, or RMS.  The canister will be lifted up to the changeout room and the payload transferred inside. The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. At the pad, the payload will be transferred into the payload changeout room on the rotating service structure. The transporter is 65 feet long and 23 feet wide. The transporter’s wheels are independently steerable, permitting it to move forward, backward, sideways or diagonally and to turn on its own axis like a carousel. It is equipped with pneumatic-actuated braking and hydrostat¬ic leveling and drive systems. It is steered from a two-seat operator cab mounted at one end.  From the payload changeout room, the pressurized module and RMS then will be transferred into space shuttle Discovery’s payload bay.  Launch is targeted for May 31.  Photo credit: NASA/Kim Shiflett KSC-08pd1072

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Cen...

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center, the payload changeout room on the rotating service structure at center is open and ready to receive the STS-124 mission payload inside ... More

CAPE CANAVERAL, Fla. -   In the Canister Rotation Facility at NASA's Kennedy Space Center, workers check the umbilical lines that keep a controlled environment in the payload canister.  The canister will be lifted to a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2771

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's K...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, workers check the umbilical lines that keep a controlled environment in the payload canister. The canister will be lif... More

CAPE CANAVERAL, Fla. -  On its way to Launch Pad 39A, the payload canister passes the Vehicle Assembly Building and Launch Control Center at NASA's Kennedy Space Center in Florida.  The canister carries a cargo of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.  Photo credit: NASA/Troy Cryder KSC-08pd2784

CAPE CANAVERAL, Fla. - On its way to Launch Pad 39A, the payload cani...

CAPE CANAVERAL, Fla. - On its way to Launch Pad 39A, the payload canister passes the Vehicle Assembly Building and Launch Control Center at NASA's Kennedy Space Center in Florida. The canister carries a cargo... More

CAPE CANAVERAL, Fla. -    On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane attach adjusted guide shoes onto the outside of the payload canister for attempt at a second lift into the payload changeout room.  The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2792

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Ce...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane attach adjusted guide shoes onto the outside of the payload canister for attempt at a second lift into the payload ... More

CAPE CANAVERAL, Fla. -  A daylight view at NASA's Kennedy Space Center Launch Pad 39A shows the payload canister at left still attached to the payload changeout room where transfer of the payload will take place.  The payload comprises four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At center is Atlantis, atop the mobile launcher platform that straddles the flame trench below. At right is the 300,000-gallon water tank that supplies the deluge of water for sound suppression during liftoff. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10. Photo credit: NASA/Jack Pfaller KSC-08pd2804

CAPE CANAVERAL, Fla. - A daylight view at NASA's Kennedy Space Center...

CAPE CANAVERAL, Fla. - A daylight view at NASA's Kennedy Space Center Launch Pad 39A shows the payload canister at left still attached to the payload changeout room where transfer of the payload will take plac... More

KENNEDY SPACE CENTER, FLA. -- Workers in the Payload Changeout Room (PCR) at Launch Pad 39A check out the SPACEHAB Double Module before moving into the PCR. Part of the Rotating Service Structure, the PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC00pp0373

KENNEDY SPACE CENTER, FLA. -- Workers in the Payload Changeout Room (P...

KENNEDY SPACE CENTER, FLA. -- Workers in the Payload Changeout Room (PCR) at Launch Pad 39A check out the SPACEHAB Double Module before moving into the PCR. Part of the Rotating Service Structure, the PCR is an... More

KENNEDY SPACE CENTER, FLA. -- The payload canister transporter and canister approach the rotating service structure (RSS) on Launch Pad 39B. Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116.  They will be moved into the payload changeout room (PCR) on the RSS and transferred into Space Shuttle Discovery's payload bay once the vehicle has rolled out to the pad. The PCR is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. Seals around the mating surface of the PCR fit against the orbiter and allow the opening of the payload bay or canister doors and removal of the cargo without exposure to outside air and contaminants. A clean-air purge in the PCR maintains environmental control during PCR cargo operations. Cargo is removed from the payload canister and installed vertically in the orbiter by the payload ground handling mechanism (PGHM). Photo credit: NASA/Kim Shiflett KSC-06pd2458

KENNEDY SPACE CENTER, FLA. -- The payload canister transporter and can...

KENNEDY SPACE CENTER, FLA. -- The payload canister transporter and canister approach the rotating service structure (RSS) on Launch Pad 39B. Inside the canister are the SPACEHAB module and the port 5 truss segm... More

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, a worker prepares the mechanism to open the doors of the canister containing the S3/S4 integrated truss. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The truss is the payload for Space Shuttle Atlantis on mission STS-117 to the International Space Station.  The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15. Photo credit: NASA/Jack Pfaller KSC-07pd0359

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on L...

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, a worker prepares the mechanism to open the doors of the canister containing the S3/S4 integrated truss. The PCR is the enclo... More

KENNEDY SPACE CENTER, FLA. --    Inside the payload changeout room on Launch Pad 39A, a technician monitors the progress of the Columbus Laboratory module as it is transferred into space shuttle Atlantis' payload bay.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The lab module, built by the European Space Agency, also known as ESA, is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. Columbus is ESA's largest single contribution to the space station. Columbus will fly to the International Space Station on mission STS-122.  The launch is targeted for Dec. 6.  Photo credit: NASA/Kim Shiflett KSC-07pd3293

KENNEDY SPACE CENTER, FLA. -- Inside the payload changeout room on ...

KENNEDY SPACE CENTER, FLA. -- Inside the payload changeout room on Launch Pad 39A, a technician monitors the progress of the Columbus Laboratory module as it is transferred into space shuttle Atlantis' paylo... More

KENNEDY SPACE CENTER, FLA. --  The payload canister moves out of the Vertical Processing Facility, on its way to Launch Pad 39A at NASA's Kennedy Space Center.  The canister is transferring the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, to the payload changeout room, part of the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0332

KENNEDY SPACE CENTER, FLA. -- The payload canister moves out of the V...

KENNEDY SPACE CENTER, FLA. -- The payload canister moves out of the Vertical Processing Facility, on its way to Launch Pad 39A at NASA's Kennedy Space Center. The canister is transferring the first section of... More

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, the payload canister containing the Japanese Experiment Module -Pressurized Module is being raised to a vertical position. The canister contains the Japanese Experiment Module -Pressurized Module, which will be transported to Launch Pad 39A for space shuttle Discovery’s STS-124 mission.  At the pad, the payload will be transferred from the canister into the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. On the mission, the STS-124 crew will transport the JEM as well as the Japanese Remote Manipulator System to the International Space Station.  The launch of Discovery is targeted for May 31.    Photo credit: NASA/Jim Grossmann KSC-08pd1012

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's...

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, the payload canister containing the Japanese Experiment Module -Pressurized Module is being raised to a vertical posi... More

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, workers check the placement of the payload canister after it was lowered onto the payload canister transporter.  The canister contains the Japanese Experiment Module -Pressurized Module, which will be transported to Launch Pad 39A for space shuttle Discovery’s STS-124 mission. At the pad, the payload will be transferred from the canister into the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. On the mission, the STS-124 crew will transport the JEM as well as the Japanese Remote Manipulator System to the International Space Station.  The launch of Discovery is targeted for May 31.    Photo credit: NASA/Jim Grossmann KSC-08pd1020

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's...

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, workers check the placement of the payload canister after it was lowered onto the payload canister transporter. The ... More

CAPE CANAVERAL, Fla. -   In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted to a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2778

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's K...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted to a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of ... More

CAPE CANAVERAL, Fla. -   In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted toward a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2775

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's K...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted toward a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists... More

CAPE CANAVERAL, Fla. -  In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted toward a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2776

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Ke...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is lifted toward a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists ... More

CAPE CANAVERAL, Fla. -  Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, workers open the doors of the payload canister.  Inside are four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope. From top to bottom are the Multi-Use Logistic Equipment carrier, the Flight Support System carrier, the Orbital Replacment Unit Carrier and the Super Lightweight Interchangeable Carrier. The payload will be moved into the PCR. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10. Photo credit: NASA/Jack Pfaller KSC-08pd2800

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, at ...

CAPE CANAVERAL, Fla. - Inside the payload changeout room, or PCR, at NASA's Kennedy Space Center Launch Pad 39A, workers open the doors of the payload canister. Inside are four carriers holding various equipm... More

CAPE CANAVERAL, Fla. -  At NASA's Kennedy Space Center, the payload canister is in the Canister Rotation Facility where it will be lifted to a vertical position.  The canister transporter will then carry the canister and its cargo to Launch Pad 39A.  The cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2769

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center, the payload ca...

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center, the payload canister is in the Canister Rotation Facility where it will be lifted to a vertical position. The canister transporter will then carry the ca... More

KENNEDY SPACE CENTER, FLA. -- The doors of the payload canister open in the Payload Changeout Room (PCR) at Launch Pad 39A to reveal the SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (ICC). Part of the Rotating Service Structure, the PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC-00pp0370

KENNEDY SPACE CENTER, FLA. -- The doors of the payload canister open i...

KENNEDY SPACE CENTER, FLA. -- The doors of the payload canister open in the Payload Changeout Room (PCR) at Launch Pad 39A to reveal the SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (ICC). Part ... More

KENNEDY SPACE CENTER, FLA. --  With umbilical lines still attached, the payload canister is lifted up to the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A The canister contains the S3/S4 integrated truss for mission STS-117 to the International Space Station aboard Space Shuttle Atlantis. Once inside the PCR, the S3/S4 arrays will be transferred into Space Shuttle Atlantis' payload bay after the vehicle has rolled out to the pad.  The changeout room is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15.  Photo credit: NASA/Kim Shiflett KSC-07pd0350

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, th...

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, the payload canister is lifted up to the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A The canister contain... More

KENNEDY SPACE CENTER, FLA. --  With umbilical lines still attached, the payload canister is lifted up to the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A The canister contains the S3/S4 integrated truss for mission STS-117 to the International Space Station aboard Space Shuttle Atlantis. Once inside the PCR, the S3/S4 arrays will be transferred into Space Shuttle Atlantis' payload bay after the vehicle has rolled out to the pad.  The changeout room is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15.  Photo credit: NASA/Kim Shiflett KSC-07pd0351

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, th...

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, the payload canister is lifted up to the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A The canister contain... More

KENNEDY SPACE CENTER, FLA. --  With umbilical lines still attached, the payload canister is lifted up to the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A The canister contains the S3/S4 integrated truss for mission STS-117 to the International Space Station aboard Space Shuttle Atlantis. Once inside the PCR, the S3/S4 arrays will be transferred into Space Shuttle Atlantis' payload bay after the vehicle has rolled out to the pad.  The changeout room is the enclosed, environmentally controlled portion of the RSS that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15.  Photo credit: NASA/Kim Shiflett KSC-07pd0352

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, th...

KENNEDY SPACE CENTER, FLA. -- With umbilical lines still attached, the payload canister is lifted up to the payload changeout room on the rotating service structure (RSS) on Launch Pad 39A The canister contain... More

KENNEDY SPACE CENTER, FLA. --   On Launch Pad 39A, the payload canister is lifted up to the payload changeout room.  Inside the canister are the S5 truss, SPACEHAB module and external stowage platform 3, the payload for mission STS-118.  The red umbilical lines are still attached.  The payloads will be transferred inside the changeout room to wait for Space Shuttle Endeavour to arrive at the pad.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay.  The mission will be Endeavour's first flight in more than four years. The shuttle has undergone extensive modifications, including the addition of safety upgrades already added to shuttles Discovery and Atlantis. Endeavour also features new hardware, such as the Station-to-Shuttle Power Transfer System that will allow the docked shuttle to draw electrical power from the station and extend its visits to the orbiting lab.  Space Shuttle Endeavour is targeted for launch on Aug. 7 from Launch Pad 39A.   Photo credit: NASA/Kim Shiflett KSC-07pd1813

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A, the payload caniste...

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A, the payload canister is lifted up to the payload changeout room. Inside the canister are the S5 truss, SPACEHAB module and external stowage platform 3, the pa... More

KENNEDY SPACE CENTER, FLA. --  Under a darkening sky, the payload canister (center, far right) containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, slowly moves toward Launch Pad 39A at NASA's Kennedy Space Center.  At the pad the payload will be transferred to the payload changeout room, part of the rotating service structure. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0335

KENNEDY SPACE CENTER, FLA. -- Under a darkening sky, the payload cani...

KENNEDY SPACE CENTER, FLA. -- Under a darkening sky, the payload canister (center, far right) containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Age... More

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, the payload canister containing the Japanese Experiment Module -Pressurized Module is suspended vertically after rotation from the horizontal.  The canister contains the Japanese Experiment Module -Pressurized Module, which will be transported to Launch Pad 39A for space shuttle Discovery’s STS-124 mission.  At the pad, the payload will be transferred from the canister into the payload changeout room on the rotating service structure.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay. On the mission, the STS-124 crew will transport the JEM as well as the Japanese Remote Manipulator System to the International Space Station.  The launch of Discovery is targeted for May 31.    Photo credit: NASA/Jim Grossmann KSC-08pd1014

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's...

CAPE CANAVERAL, Fla. -- In the Vertical Integration Facility at NASA's Kennedy Space Center, the payload canister containing the Japanese Experiment Module -Pressurized Module is suspended vertically after rota... More

CAPE CANAVERAL, Fla. –   On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister approaches the waiting payload changeout room in the rotating service structure.  The canister will be lifted up to the changeout room and the payload transferred inside.  The changeout room is the enclosed, environmentally controlled portion of the service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  From the payload changeout room, the pressurized module and RMS then will be transferred into space shuttle Discovery’s payload bay.  Launch is targeted for May 31.  Photo credit: NASA/Kim Shiflett KSC-08pd1073

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Cen...

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister approaches the waiting payload changeout room in the rotating service structure. The canister will be lifted up t... More

CAPE CANAVERAL, Fla. -  The payload canister moves out of the Canister Rotation Facility at NASA's Kennedy Space Center in Florida heading for Launch Pad 39A.  It carries a cargo of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.   At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.  Photo credit: NASA/Troy Cryder KSC-08pd2782

CAPE CANAVERAL, Fla. - The payload canister moves out of the Canister...

CAPE CANAVERAL, Fla. - The payload canister moves out of the Canister Rotation Facility at NASA's Kennedy Space Center in Florida heading for Launch Pad 39A. It carries a cargo of four carriers holding variou... More

CAPE CANAVERAL, Fla. -   On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane attach adjusted guide shoes onto the outside of the payload canister for attempt at a second lift to the payload changeout room.  The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2789

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cen...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane attach adjusted guide shoes onto the outside of the payload canister for attempt at a second lift to the payload cha... More

CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is ready for another attempt to be lifted to the payload changeout room. The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2794

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister is ready for another attempt to be lifted to the payload changeout room. The first attempt encountered problems whe... More

CAPE CANAVERAL, Fla. -   On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane attach adjusted guide shoes onto the outside of the payload canister for attempt at a second lift to the payload changeout room. The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2790

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cen...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane attach adjusted guide shoes onto the outside of the payload canister for attempt at a second lift to the payload cha... More

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure toward the Payload Changeout Room, an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC-00pp0367

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister ...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure toward the Payload Cha... More

A US Navy (USN) CH-46 Sea Knight helicopter lands for a cargo delivery at Junction City, Ar Ramadi, Iraq. The US Marine Corps (USMC) 1ST Marine Division (MARDIV), and is engaged in Security and Stabilization Operations (SASO) in the Al Anbar Province of Iraq, in support of Operation IRAQI FREEDOM

A US Navy (USN) CH-46 Sea Knight helicopter lands for a cargo delivery...

The original finding aid described this photograph as: Subject Operation/Series: IRAQI FREEDOM Base: Junction City State: Al Anbar Country: Iraq (IRQ) Scene Camera Operator: PFC Brandon E. Loveless, USMC ... More

KENNEDY SPACE CENTER, FLA. --  In the payload changeout room (PCR) on Launch Pad 39A, workers prepare to open the canister containing the S3/S4 integrated truss.   The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The truss is the payload for Space Shuttle Atlantis on mission STS-117 to the International Space Station.  The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15. Photo credit: NASA/Jack Pfaller KSC-07pd0358

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on ...

KENNEDY SPACE CENTER, FLA. -- In the payload changeout room (PCR) on Launch Pad 39A, workers prepare to open the canister containing the S3/S4 integrated truss. The PCR is the enclosed, environmentally contr... More

KENNEDY SPACE CENTER, FLA. --  A worker in the payload changeout room (PCR) on Launch Pad 39A monitors the payload ground-handling mechanism that is used to transfer the payload into the PCR and the shuttle's payload bay. The PCR is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The truss is the payload for Space Shuttle Atlantis on mission STS-117 to the International Space Station.  The Atlantis crew will install the new truss segment, retract a set of solar arrays and unfold a new set on the starboard side of the station. Launch is targeted for March 15. Photo credit: NASA/Jack Pfaller KSC-07pd0363

KENNEDY SPACE CENTER, FLA. -- A worker in the payload changeout room ...

KENNEDY SPACE CENTER, FLA. -- A worker in the payload changeout room (PCR) on Launch Pad 39A monitors the payload ground-handling mechanism that is used to transfer the payload into the PCR and the shuttle's p... More

KENNEDY SPACE CENTER, FLA. --    Inside the payload changeout room on Launch Pad 39A, a technician monitors the progress of the Columbus Laboratory module as it is transferred into space shuttle Atlantis' payload bay.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay. The lab module, built by the European Space Agency, also known as ESA, is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. Columbus is ESA's largest single contribution to the space station. Columbus will fly to the International Space Station on mission STS-122.  The launch is targeted for Dec. 6.  Photo credit: NASA/Kim Shiflett KSC-07pd3291

KENNEDY SPACE CENTER, FLA. -- Inside the payload changeout room on ...

KENNEDY SPACE CENTER, FLA. -- Inside the payload changeout room on Launch Pad 39A, a technician monitors the progress of the Columbus Laboratory module as it is transferred into space shuttle Atlantis' paylo... More

KENNEDY SPACE CENTER, FLA. --   The integrated cargo carrier - lite is being transferred to space shuttle Atlantis' payload bay from the payload changeout room on Launch Pad 39A.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the orbiter payload bay.  The carrier holds three elements: a nitrogen tank assembly that is part of the external active thermal control system on the International Space Station, the European technology Exposure Facility composed of nine science instruments and an autonomous temperature measurement unit, and the SOLAR payload designed for sun observation.  Also to be transferred is the Columbus Laboratory module.  The lab module, built by the European Space Agency, also known as ESA, is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. Columbus is ESA's largest single contribution to the space station. Columbus will fly to the International Space Station on mission STS-122.  The launch is targeted for Dec. 6.  Photo credit: NASA/Kim Shiflett KSC-07pd3289

KENNEDY SPACE CENTER, FLA. -- The integrated cargo carrier - lite is...

KENNEDY SPACE CENTER, FLA. -- The integrated cargo carrier - lite is being transferred to space shuttle Atlantis' payload bay from the payload changeout room on Launch Pad 39A. The changeout room is the encl... More

KENNEDY SPACE CENTER, FLA. --  The payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, nears the rotating service structure on Launch Pad 39A at NASA's Kennedy Space Center.  The payload will be transferred to the payload changeout room on the service structure.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0339

KENNEDY SPACE CENTER, FLA. -- The payload canister containing the fir...

KENNEDY SPACE CENTER, FLA. -- The payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, nea... More

KENNEDY SPACE CENTER, FLA. --  On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre, is lifted up toward the payload changeout room in the rotating service structure. Umbilical lines are still attached.   The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into an orbiter's payload bay.  The payload will be installed into Endeavour for launch on the STS-123 mission targeted for March 11.  Photo credit: NASA/Kim Shiflett KSC-08pd0342

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Spa...

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 39A at NASA's Kennedy Space Center, the payload canister containing the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Sp... More

CAPE CANAVERAL, Fla. -    In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is in a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four carriers holding various equipment for the STS-125 mission aboard space shuttle Atlantis to service NASA’s Hubble Space Telescope.  At the pad, the cargo will be moved into the Payload Changeout Room.  The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jack Pfaller KSC-08pd2779

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's ...

CAPE CANAVERAL, Fla. - In the Canister Rotation Facility at NASA's Kennedy Space Center, the payload canister is in a vertical position for the trip to Launch Pad 39A. The canister’s cargo consists of four c... More

CAPE CANAVERAL, Fla. -  On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane have completed attaching adjusted guide shoes onto the outside of the payload canister for attempt at a second lift into the payload changeout room. The first attempt encountered problems when Teflon pads on “shoes” attached to the outside of the canister that go onto guide rails to help the canister into the room didn’t fit properly.  The two shoes were removed, slightly shaved down so that they would fit into the rails and put back on the canister. The changeout room is the enclosed, environmentally controlled portion of the rotating service structure that supports cargo delivery to the pad and subsequent vertical installation into the shuttle’s payload bay. Launch of Atlantis is targeted for Oct. 10.   Photo credit: NASA/Jim Grossmann KSC-08pd2793

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Cent...

CAPE CANAVERAL, Fla. - On Launch Pad 39A at NASA's Kennedy Space Center, workers on a crane have completed attaching adjusted guide shoes onto the outside of the payload canister for attempt at a second lift i... More

Public domain stock image. Space technology atv4, science technology.
KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure (RSS) toward the Payload Changeout Room, an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. At right of the RSS is the Fixed Service Structure, topped by the 80-foot-tall fiberglass lightning mast. The primary payload on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC-00pp0368

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister ...

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, the payload canister with the SPACEHAB Double Module and Integrated Cargo Carrier (ICC) inside is lifted up the Rotating Service Structure (RSS) toward the Paylo... More

KENNEDY SPACE CENTER, FLA. -- The doors of the payload canister open in the Payload Changeout Room (PCR) at Launch Pad 39A to reveal the SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (ICC). Part of the Rotating Service Structure, the PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC00pp0370

KENNEDY SPACE CENTER, FLA. -- The doors of the payload canister open i...

KENNEDY SPACE CENTER, FLA. -- The doors of the payload canister open in the Payload Changeout Room (PCR) at Launch Pad 39A to reveal the SPACEHAB Double Module (bottom) and Integrated Cargo Carrier (ICC). Part ... More

KENNEDY SPACE CENTER, FLA. -- A closeup shows the Integrated Cargo Carrier (top) and SPACEHAB Double Module (below) ready to be moved into the Payload Changeout Room (PCR) at Launch Pad 39A. Part of the Rotating Service Structure, the PCR is an environmentally controlled facility supporting cargo delivery to the pad and vertical installation in the orbiter cargo bay. The primary payloads on mission STS-101, the module and ICC contain internal logistics and resupply cargo for restoring full redundancy to the International Space Station power system in preparation for the arrival of the next pressurized module, the Russian-built Zvezda. The payloads will be transferred to Space Shuttle Atlantis after Atlantis rolls out to the pad. Launch of Atlantis on mission STS-101 is scheduled no earlier than April 17, 2000 KSC-00pp0372

KENNEDY SPACE CENTER, FLA. -- A closeup shows the Integrated Cargo Car...

KENNEDY SPACE CENTER, FLA. -- A closeup shows the Integrated Cargo Carrier (top) and SPACEHAB Double Module (below) ready to be moved into the Payload Changeout Room (PCR) at Launch Pad 39A. Part of the Rotatin... More

Previous

of 2

Next