The World's Largest Public Domain Media Search Engine
Spacelab. NASA Skylab space station

Similar

KENNEDY SPACE CENTER, FLA. - - In the Vehicle Assembly Building, the solid rocket boosters (SRBs) are being stacked for the orbiter Discovery and mission STS-116. They are in high bay 3, situated on the mobile launcher platform, seen beneath the aft skirt. Discovery will be rolling over to the VAB in early November to be stacked with the SRBs and external tank for launch. ): STS-116 will be mission number 20 to the International Space Station and construction flight 12A.1. The mission payload is the SPACEHAB module, the P5 integrated truss structure and other key components. Launch is scheduled for no earlier than Dec. 7. Photo credit: NASA/Jack Pfaller KSC-06pd2258

KENNEDY SPACE CENTER, FLA. - - In the Vehicle Assembly Building, the solid rocket boosters (SRBs) are being stacked for the orbiter Discovery and mission STS-116. They are in high bay 3, situated on the mobile launcher platform, seen beneath the aft skirt. Discovery will be rolling over to the VAB in early November to be stacked with the SRBs and external tank for launch. ): STS-116 will be mission number 20 to the International Space Station and construction flight 12A.1. The mission payload is the SPACEHAB module, the P5 integrated truss structure and other key components. Launch is scheduled for no earlier than Dec. 7. Photo credit: NASA/Jack Pfaller KSC-06pd2258

STS 102 International Space Station (ISS) mission

STS 102 International Space Station (ISS) mission

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, workers confirm the Multi-Purpose Logistics Module Donatello is safely in place on a work stand. Previously housed in the Operations and Checkout Building, Donatello was brought into the SSPF for routine testing. This is the first time all three MPLMs (Donatello, Raffaello and Leonardo) are in the SSPF. The MPLMs were built by the Italian Space Agency, to serve as reusable logistics carriers and the primary delivery system to resupply and return station cargo requiring a pressurized environment. The third MPLM, Raffaello, is scheduled to fly on Space Shuttle Atlantis on mission STS-114.

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, workers confirm the Multi-Purpose Logistics Module Donatello is safely in place on a work stand. Previously housed in the Operations and Checkout Building, Donatello was brought into the SSPF for routine testing. This is the first time all three MPLMs (Donatello, Raffaello and Leonardo) are in the SSPF. The MPLMs were built by the Italian Space Agency, to serve as reusable logistics carriers and the primary delivery system to resupply and return station cargo requiring a pressurized environment. The third MPLM, Raffaello, is scheduled to fly on Space Shuttle Atlantis on mission STS-114.

Members of the STS-97 crew look into Endeavour’s payload bay at some of the equipment that will be carried on the mission. At far left are (left to right) Commander Brent Jett and Mission Specialist Joseph Tanner, with a technician. At center are Mission Specialists Marc Garneau and Carlos Noriega, plus Pilot Michael Bloomfield. The equipment visible at right are the orbiter docking system (ODS) (center) and Canadian robotic arm (left and below the ODS). The arm will be used during spacewalks on the mission to install solar arrays. Each more than 100 feet long, the arrays will capture energy from the sun and convert it to power for the Station. STS-97 is scheduled to launch Nov. 30 at about 10:06 p.m. EST KSC-00pp1750

Members of the STS-97 crew look into Endeavour’s payload bay at some of the equipment that will be carried on the mission. At far left are (left to right) Commander Brent Jett and Mission Specialist Joseph Tanner, with a technician. At center are Mission Specialists Marc Garneau and Carlos Noriega, plus Pilot Michael Bloomfield. The equipment visible at right are the orbiter docking system (ODS) (center) and Canadian robotic arm (left and below the ODS). The arm will be used during spacewalks on the mission to install solar arrays. Each more than 100 feet long, the arrays will capture energy from the sun and convert it to power for the Station. STS-97 is scheduled to launch Nov. 30 at about 10:06 p.m. EST KSC-00pp1750

STS-132 MINI RESEARCH MODULE-1 INSTALL TO CANISTER 2010-2612

STS-132 MINI RESEARCH MODULE-1 INSTALL TO CANISTER 2010-2612

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, an overhead crane lifts the Kibo Experiment Logistics Module Exposed Section, or ELM-ES. The ELM-ES will be moved to a workstand. The ELM-ES is one of the final components of the Japan Aerospace Exploration Agency's Kibo laboratory for the International Space Station. It can provide payload storage space and can carry up to three payloads at launch. The ELM-ES will be carried aboard space shuttle Endeavour on the STS-127 mission targeted for launch June 13. Photo credit: NASA/Jack Pfaller KSC-2009-2628

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, an overhead crane lifts the Kibo Experiment Logistics Module Exposed Section, or ELM-ES. The ELM-ES will be moved to a workstand. The ELM-ES is one of the final components of the Japan Aerospace Exploration Agency's Kibo laboratory for the International Space Station. It can provide payload storage space and can carry up to three payloads at launch. The ELM-ES will be carried aboard space shuttle Endeavour on the STS-127 mission targeted for launch June 13. Photo credit: NASA/Jack Pfaller KSC-2009-2628

Spacelab. NASA Skylab space station

description

Summary

At Marshall Space Flight Center, Skylab's Multiple Docking Adapter (MDA) flight article undergoes center-of-gravity testing. Developed and fabricated by MSFC, the MDA housed the control units for the Apollo Telescope Mount (ATM), Earth Resources Experiment Package (EREP), and the Zero-Gravity Material Processing Facility and provided a docking port for the Apollo Command Module.

label_outline

Tags

skylab
multiple docking adapter
mda
apollo telescope mount
atm
earth resources experiment package
erep
materials processing facility
msfc
marshall space flight center
spacelab
high resolution
apollo command module
flight article
control units
zero gravity material
nasa
date_range

Date

01/11/1970
place

Location

Marshall Spaceflight Center, Huntsville, Madison County, Alabama, United States, 35808, 34.63076, -86.66505
Google Map of 34.6307645, -86.665052
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

Explore more

skylab
skylab
multiple docking adapter
multiple docking adapter
mda
mda
apollo telescope mount
apollo telescope mount
atm
atm
earth resources experiment package
earth resources experiment package
erep
erep
materials processing facility
materials processing facility
msfc
msfc
marshall space flight center
marshall space flight center
spacelab
spacelab
high resolution
high resolution
apollo command module
apollo command module
flight article
flight article
control units
control units
zero gravity material
zero gravity material
nasa
nasa