Design and model of the new steamer America, for the western lakes

The invention of lithography at the turn of the 19th century opened a new world for bird illustrators. It brought many advantages to the artist — ease of use, a softness of line, and a new freedom to effect bold designs with a wide range of light and dark tones. Most of the fine ornithology books of the 19th century were prepared in folio format with hand-colored lithographic plates. The lithographic process is one of flat surface printing from a design drawn on stone. It is based on the principle of the resistance of grease to water. There are no raised or cut portions, as there are in engraving and etching. The image is drawn with greasy ink or chalk on a smooth stone, and the rest of the stone is treated with gum arabic and nitric acid. The gum retains the lines of the greasy design, which repels the water used in printing. Special paper and ink, as well as a special press, are needed to produce the prints. First used for bird illustration in 1820, lithography was widely adopted by the best artists of the century. The technique was popular because the artist could draw his own illustration directly on the lithographic stone. Prints could be made from the drawing with no intermediary such as an engraver. Accurately reproduced and then colored by hand, the resulting illustrations gave the impression of original watercolor paintings.

Steam Machines, Engines, Locomotives. In 1781 James Watt patented a steam engine that produced continuous rotary motion. Watt's ten-horsepower engines enabled a wide range of manufacturing machinery to be powered. The engines could be sited anywhere that water and coal or wood fuel could be obtained. By 1883, engines that could provide 10,000 hp had become feasible. The steam engine was one of the most important technologies of the Industrial Revolution.

In the early years of the war many civilian ships were confiscated for military use, while both sides built new ships. The most popular ships were tinclads—mobile, small ships that actually contained no tin. These ships were former merchant ships, generally about 150 feet in length, with about two to six feet of draft, and about 200 tons. Shipbuilders would remove the deck and add an armored pilothouse as well as sheets of iron around the forward part of the casemate and the engines. Most of the tinclads had six guns: two or three twelve-pounder or twenty-four-pounder howitzers on each broadside, with two heavier guns, often thirty-two-pounder smoothbores or thirty-pounder rifles, in the bow. These ships proved faster than ironclads and, with such a shallow draft, worked well on the tributaries of the Mississippi.

Just an assorted steamships collection for research.